2001-April Archives by Author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Apr 2 12:00:55 2001
Ending: Mon Apr 30 01:58:03 2001
Messages: 74

• [tulip] tulip0.91g with 2.2.16 and CONFIG_NET_HW_FLOWCONTROL defined =?iso-8859-1?q?Cathal=20Daly?=
• [tulip] Ovislin Fast Ethernet PCMCIA card Francisco Alcaraz Ariza
• [tulip] Fwd: Ovislin Fast Ethernet PCMCIA card Francisco Alcaraz Ariza
• [tulip] Linksys PCM200 v2 PC Card problems. BPardee@newark.com
• [tulip] Multiple MAC address with one Tulip card Donald Becker
• [tulip] Recommendations for compiling tulip.c on Solaris? Donald Becker
• [tulip] Catalist 1924<->Linksts LNE100TX only half duplex 10BaseT ??? ;-( Donald Becker
• [tulip] Linksys NC100 w/ RH7 - Linux Newbie Question Donald Becker
• [tulip] Conexant LANfinity Donald Becker
• [tulip] tulip & kernel 2.4 (structure has no member named `tbusy') Donald Becker
• [tulip] Any sucess with Conexant miniPCI (presario notebooks) on Linux? Donald Becker
• [tulip] (no subject) Donald Becker
• [tulip] strange speed&duplex? (accton en 2242) Donald Becker
• [tulip] strange speed&duplex? (accton en 2242) Donald Becker
• [tulip] Installation - Linksys Ethercard, round 2 Donald Becker
• [tulip] Success!!! sorta... Donald Becker
• [tulip] insmod tulip problem (Device or resource busy) Donald Becker
• [tulip] 92t fails to recover from reset, ng_tulip 89K does Donald Becker
• [tulip] !HELP mii-diag set force:permision denied Donald Becker
• [tulip] Setting tulip card to 100BaseTx Donald Becker
• [tulip] Ovislin Fast Ethernet PCMCIA card Donald Becker
• [tulip] Linksys PCM200 v2 PC Card problems. Donald Becker
• [tulip] Version 4.1 LinkSys 10/100 Cards Robert W. Brooks
• [tulip] Disregard Message: Version 4.1 LinkSys 10/100 Cards Robert W. Brooks
• [tulip] Re: Problem with Linksys CardBus PCM200 Timothy R. Butler
• [tulip] Any sucess with Conexant miniPCI (presario notebooks) on Linux? Richard Casey
• [tulip] tulip & kernel 2.4 (structure has no member named `tbusy') Bogdan Costescu
• [tulip] ZYNX 4-port (21143) fails to autonegotiate correctly. (tulip: 0.9.14, RH 7.1) Bogdan Costescu
• [tulip] Problem with Linksys CardBus PCM200 Andrew Dana
• [tulip] Problem with tulip drivers in Redhat 7.1, driver 0.9.14 Andrew Dana
• [tulip] (no subject) Everill1@aol.com
• [tulip] Going crazy with Linksys 10/100 card and tulip driver Everill1@aol.com
• [tulip] What has happened to the tulip driver ? (inconnection with multiport cards) David Flynn
• [tulip] Removing Linksys PCMPC200 PC Card problems. Matias Freytes
• [tulip] ZYNX 4-port (21143) fails to autonegotiate correctly. (tulip: 0.9.14, RH 7.1) Ben Greear
• [tulip] ZYNX 4-port (21143) fails to autonegotiate correctly.(tulip: 0.9.14, RH 7.1) Ben Greear
• [tulip] D-LINK quad-port & autonegotiation woes... Ben Greear
• [tulip] Re: my tulip patch for Intel AnyPoint Paul Hanni
• [tulip] tulip-diag.c patch Dan Hollis
• [tulip] Netgear FA310TX problem Tony Houghton
• [tulip] Netgear FA310TX problem Tony Houghton
• [tulip] insmod tulip problem (Device or resource busy) Joseph Jacob
• [tulip] tulip - Newbie - Compile errors with pci-scan.c and tulip.c David Kramer
• [tulip] Tuning the tulip, or Good Channel bonding NICS under Linux? Camm Maguire
• [tulip] 92t fails to recover from reset, ng_tulip 89K does Camm Maguire
• [tulip] 92t fails to recover from reset, ng_tulip 89K does Camm Maguire
• [tulip] errors with tulip driver, linksys 10/100 card Rob Mantel
• [tulip] Newbie Extreme - problem with Linksys NC100 on Red Hat 7 Liam McCusker
• [tulip] Linksys NC100 w/ RH7 - Linux Newbie Question Liam McCusker
• [tulip] Newbie Extreme - problem with Linksys NC100 on Red Hat 7 Liam McCusker
• [tulip] Success!!! sorta... Liam McCusker
• [tulip] Setting tulip card to 100BaseTx Chris North
• [tulip] More on turning off autosense issue Chris North
• [tulip] Installation - Linksys Ethercard, round 2 Matthew O. Persico
• [tulip] how to compile into 2.2.18 kernel? Roisman, Dani
• [tulip] tulip & kernel 2.4 (structure has no member named `tbusy') Erik Steffl
• [tulip] tulip & kernel 2.4 (structure has no member named `tbusy') Erik Steffl
• [tulip] tulip & kernel 2.4 (structure has no member named `tbusy') Erik Steffl
• [tulip] strange speed&duplex? (accton en 2242) Erik Steffl
• [tulip] strange speed&duplex? (accton en 2242) Erik Steffl
• [tulip] tulip driver and kernel 2.4? Erik Steffl
• [tulip] tulip - Newbie - Compile errors with pci-scan.c and tulip.c Erik Steffl
• [tulip] anyone get danpex afp1100 to do fdx? Leo Wierzbowski
• [tulip] Conexant LANfinity Lei Zhang
• [tulip] Problem with Linksys CardBus PCM200 Yuhong Zhu
• [tulip] Re: Problem with Linksys CardBus PCM200 Yuhong Zhu
• [tulip] Catalist 1924<->Linksts LNE100TX only half duplex 10BaseT ??? ;-( Maxim E. Zimovets
• [tulip] Catalist 1924<->Linksys LNE100TX only half duplex 10BaseT??? ;-( Maxim E. Zimovets
• [tulip] Differentiating Input Parameters for 2 Adapters harish.vasudeva@amd.com
• [tulip] Netgear FA310TX losses network after outage or error. kmcelwain@pointcloud.com
• [tulip] !HELP mii-diag set force:permision denied ling_yue@china.com
• [tulip] Recommendations for compiling tulip.c on Solaris? qcentury
• [tulip] Multiple MAC address with one Tulip card root
• [tulip] Linksys NC/100 v2 and Multicast - firewall root

Last message date: Mon Apr 30 01:58:03 2001
Archived on: Mon Apr 30 04:08:19 2001

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...