[vortex] 3C575-TX and RedHat 7.1

[Lukas Ruf]

I experienced the same problem. Unfortunately, I cannot start the card
automatically anymore.  A workaround for me via script:

insmod 3c59x
pump -i eth0 &

TAIK

--lpr

On Wed, 05 Sep 2001, Glen R. Salo wrote:

> After installing RedHat 7.1 on my laptop, my 3Com (3C575-TX) ethernet card
> stopped working.  I have set the kernel module to 3c59x in linuxconf, but
> when I try to start the network, I get the following error in
> /var/log/messages:
> 
> eth0: command 0x5800 did not complete! Status=0xffff
> eth0: command 0x2800 did not complete! Status=0xffff
> 
> Thanks for your help.
> 
> Glen
> 
> 
> _______________________________________________
> vortex mailing list
> vortex@scyld.com
> http://www.scyld.com/mailman/listinfo/vortex

-- 
Lukas Ruf                        Swiss Federal Institute of Technology
Office: ETZ-G61.2                             Computer Engineering and
Phone: +41/1/632 7312                        Networks Laboratory (TIK)
Fax:   +41/1/632 1035                                      ETH Zentrum
PGP 2.6: ID D20BA2ED;                                    Gloriastr. 35
Fingerprint 6323 B9BC 9C8E 6563  B477 BADD FEA6 E6B7    CH-8092 Zurich