[tulip] ZNYX 4 port ZX346Q

[john wiebe]

This is a multi-part message in MIME format.
--------------6026E5E7D4FF9A6CB04DE9E8
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

 We had the same problems, You need to use the 92t version of the driver for the
ZNYX cards, though I haven't tried it with the 2.4 kernel yet.


A James Lewis wrote:
> 
> Hi,
> 
> I recently set up a pair of servers with ZNYX ZX346Q 4 port cards and have
> had nothing but problems....  The performance is really poor which I think
> is due to the card not doing full duplex correctly since it reports lots
> of collisions.... (The cards use 21143PD chips)
> 
> I've swapped them for some SUN QFE cards which perform really well, but in
> both cases only 3 of the 4 ports work...
> 
> I would have to assume that 1 port not working would be somthing to do
> with resource allocation rather than the card drivers themselves since it
> happens on BOTH drivers...
> 
> It's running 2.4.4 at the moment, and any suggestions would be really
> helpful.
> 
> A. James Lewis (james@fsck.co.uk)
> Open Source Specialists  http://www.entora.co.uk/
> Tel: +44 (0)701 0723686  Fax: +44 (0)870 3214368
> 
> _______________________________________________
> tulip mailing list, tulip@scyld.com
> To change to digest mode or unsubscribe visit
> http://www.scyld.com/mailman/listinfo/tulip
--------------6026E5E7D4FF9A6CB04DE9E8
Content-Type: text/x-vcard; charset=us-ascii;
 name="jwiebe.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for john wiebe
Content-Disposition: attachment;
 filename="jwiebe.vcf"

begin:vcard 
n:Wiebe;John 
tel;fax:978- 
tel;work:978-318-6476
x-mozilla-html:TRUE
org:Avaya
adr:version:2.1;;300 Baker Av;Concord;Ma;01742;
version:2.1
email;internet:jwiebe@avayactc.com
title:Automation Engineer
x-mozilla-cpt:;11408
fn:John  Wiebe
end:vcard

--------------6026E5E7D4FF9A6CB04DE9E8--