[tulip] - Newbie - Problems with installing the tulip.o modul

Donald Becker becker@scyld.com
Fri, 8 Sep 2000 13:18:19 -0400 (EDT)

On Fri, 8 Sep 2000, David Kramer wrote:

> I ran depmod -a, then modprobe tulip.o, checked it with lsmod found that
> pci-scan was used by tulip but tulip is still unused.  I then ran the dmesg
> | grep eth0 command and it returned the following:
> eth0: Lite-On PNIC-II rev 37 at 0xc88bc00, 00:A0:CC:32:99:C2, IRQ 11.
> I must be missing a step here.....

OK, it's presumably working.

You should now configure it with
   ifup eth0
   ifconfig eth0

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Beowulf-II Cluster Distribution
Annapolis MD 21403