GNIC II is not working

[Karsten Heinze]

Hi,

thanks to all who pointed me to the right driver.
I compiled the hamachi 0.07 (hope it is the latest driver version).

insmod works :
Mar  1 11:33:33 fily kernel: Found Hamachi GNIC-II at PCI address 0x00000000
de800004, IRQ 11.
Mar  1 11:33:33 fily kernel: hamachi.c:v0.07 8/17/98  Written by Donald
Becker
Mar  1 11:33:33 fily kernel:
^Ihttp://www.tidalwave.net/~becker/hamachi.html
Mar  1 11:33:33 fily kernel: eth1: Hamachi GNIC-II type 10911 at 0x8039000,
00:e0:b1:04:17:0e, IRQ 11.
Mar  1 11:33:33 fily kernel: eth1:  64-bit 33 Mhz PCI bus (59), Virtual
Jumpers 20, LPA 0000.
Mar  1 11:33:33 fily kernel:   PCI latency timer (CFLT) is unreasonably low
at 32.  Setting to 64 clocks.

A ifup eth1 crashs the machine.
It's a Asus P2BLS mainboard, there are no 64-bit PCI slots.
How can i tell the driver/card that it uses a 32-bit 33 Mhz PCI bus slot ?

Thanks,

Karsten


 | To unsubscribe, send mail to Majordomo@cesdis.gsfc.nasa.gov, and within the
 |  body of the mail, include only the text:
 |   unsubscribe this-list-name youraddress@wherever.org
 | You will be unsubscribed as speedily as possible.