[vortex] WakeOnLan with 3c905C-TX

[Dr.Tilmann Bubeck]

Markus,

Have you entered 

options 3c59x enable_wol=1

into /etc/modules.conf to enable WOL?

Till




On Mon, 27 May 2002 20:41:36 +0200
Markus Melms <hvx@cryptnet.de> wrote:

> Hi,
> 
> im trying to get wake-on-lan to work with the 3com 905C-TX card und
> linux kernel 2.4.18.
> It used to work some time ago with win95, so its probably a software
> problem. When the system is powered off the LED doesnt light any more
> and the system doesnt boot up when executing etherwake..
> 
> Below is some output and I would be happy to provide even more when
> needet. Thanks for any help,
> 	Markus
> 
> joe:~# ./pciconfig -#7 -M
> pci-config.c:v2.02 1/8/2001 Donald Becker (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Device #7 at bus 0 device/function 9/0.
>   920010b7 02100007 02000074 00002008 0000e401 e7000000 00000000
>   00000000 00000000 00000000 00000000 100010b7 e6000000 000000dc
>   00000000 0a0a010b 00000000 00000000 00000000 00000000 00000000
>   00000000 00000000 00000000 00000000 00000000 00000000 00000000
>   00000000 00000000 00000000 00000000 00000000 00000000 00000000
>   00000000 00000000 00000000 00000000 00000000 00000000 00000000
>   00000000 00000000 00000000 00000000 00000000 00000000 00000000
>   00000000 00000000 00000000 00000000 00000000 00000000 fe020001
>   b7004000 00000000 00000000 00000000 00000000 00000000 00000000
>   00000000 Base Address 0: I/O at 0000e400.
>   Base Address 1: Memory at e7000000.
>   Extended capabilities, first structure at offset 0xdc.
>   Extended PCI capability type 1 at 0xdc, next 0.
>    Power management entry ver. 2: Capabilities fe02, Ctrl 4000, Event
>    b700. Power state D0.
> 
> joe:~# ./vortex-diag -a
> vortex-diag.c:v2.06 4/18/2002 Donald Becker (becker@scyld.com)
>  http://www.scyld.com/diag/index.html
> Index #1: Found a 3c905C Tornado 100baseTx adapter at 0xe400.
> The Vortex chip may be active, so FIFO registers will not be read.
> To see all register values use the '-f' flag.
> Initial window 7, registers values by window:
>   Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
>   Window 1: FIFO FIFO 0700 0000 0000 007f 0000 2000.
>   Window 2: 5000 66da bdc2 0000 0000 0000 0052 4000.
>   Window 3: 0000 0380 05ea 0020 000a 0800 0800 6000.
>   Window 4: 0000 0000 0000 0cfa 0001 8880 2000 8000.
>   Window 5: 1ffc 0000 0000 0600 0807 06ce 06c6 a000.
>   Window 6: 0000 0000 0000 c500 2000 3f62 2f88 c000.
>   Window 7: 0000 0000 0000 0000 0000 0000 0000 e000.
> Vortex chip registers at 0xe400
>   0xE410: **FIFO** 00000000 0000005b *STATUS*
>   0xE420: 00000020 00000000 00080000 00000004
>   0xE430: 00000000 47b0b850 012cc130 00080004
>  Indication enable is 06c6, interrupt enable is 06ce.
>  No interrupt sources are pending.
>  Transceiver/media interfaces available:  100baseTx 10baseT.
> Transceiver type in use:  Autonegotiate.
>  MAC settings: full-duplex.
>  Station address set to 00:50:da:66:c2:bd.
>  Configuration options 0052.
> 
> joe:~# dmesg
> --cut---
> PCI: Found IRQ 11 for device 00:09.0
> PCI: Sharing IRQ 11 with 00:07.2
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:09.0: 3Com PCI 3c905C Tornado at 0xe400. Vers LK1.1.16
> --cut---
> _______________________________________________
> vortex mailing list
> vortex@scyld.com
> http://www.scyld.com/mailman/listinfo/vortex


-- 
+-------+-------------------------------------------------------------+
|       | dr. tilmann bubeck               reinform medien- und       |
| rein  |                                  informationstechnologie AG |
| form  | cell.: +49 (172) 8 84 29 72      koenigstrasse 80           |
|    AG | fax  : +49 (711) 7 22 77 34      70173 stuttgart / germany  |
|       | email: t.bubeck@reinform.de      http://www.reinform.de     |
+-------+----------------------------------------------(in gruendung)-+