[vortex] Wake-On-Lan Problem with 3c905C-TX

[Stephan Plepelits]

Hi!

I'm installing a nice cluster, the machines all have a 3c905C (the new one,
with a smaller layout).

I want to use the wake on lan feature. First try (after pluging the power
to it): I'm sending this magic packet, and it really starts.

After poweroff, the network card also is off (So the machine can not be
waked). so I searched the Web, and found 'pci-config'. After a patch to the
program (the ID of the NIC, and the ID the program requires, is not the
same. pci-config reports 920010b7, it requires 905510b7 for the 3com 905B),
the card seems to go to wake-on-lan-mode (the network is down, after
poweroff the card keeps flashing.

Problem: I can't wake the machine, although it seems to be right.
Is it possible, that the command for the 3c905b and -c is different?

Shall I provide you with more information? Output of pci-config, when
setting the card to wake-on-lan-mode?

greetings and thanks,
	Stephan
-- 
** **  * *  **   ** * *  *  ** **   * * *  *  ** ** *  *  ** *
                       Stephan Plepelits
                Vienna University of Technology
         Institute of Computergraphics and Algorithms
plepelits@cg.tuwien.ac.at           http://www.cg.tuwien.ac.at
Tel.: +43 1 58801x18634                 Fax: +43 1 58801x18698
** * *  *  * * *    ** **  *  * *  * * *  **  *  * ** *  * * *