3C905TX not Working.

[G.J.]

where is "lspci"

i don't have that on my system. (mandrake linux 5.3)

--gareth

On Fri, 16 Apr 1999, A. R. M. wrote:

> By the way, I also get the following when I do a "lspci":
> 
> =========================
> 00:00.0 Host bridge: Intel Corporation 440BX - 82443BX Host (rev 03)
> 00:01.0 PCI bridge: Intel Corporation 440BX - 82443BX AGP (rev 03)
> 00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
> 00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
> 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
> 00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
> 00:06.0 SCSI storage controller: Unknown device 9005:001f
> 00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
> 00:0b.0 Ethernet controller: Hitachi Micro Systems: Unknown device 9050
> =========================
> 
> As you see (from previous e-mail) the 3c905 card is recognized momentarily
> during bootup but then it's not found by pciutils and nor does it get
> recognized at eth0.
> The following lines are from /proc/pci which confirm the above from lspci:
> 
> Bus 0, device 11, function 0:
> Ethernet controller: Unknown vendor Unknown device (rev 0).
> Vendor id=1037. Device id=0.
> Medium devsel. IRQ 11. Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
> I/O at 0xb800 [0xb801].
> 

--
/*
 * Gareth Jenkins
 * Linux hacker, "Mr. Sensitive", armchair philosopher,
 * PERL lover, child of God
 *
 * http://endor.hsutx.edu/~locutus http://www.wtlug.org
 */