3C905TX not Working.

[A. R. M.]

By the way, I also get the following when I do a "lspci":

=========================
00:00.0 Host bridge: Intel Corporation 440BX - 82443BX Host (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX - 82443BX AGP (rev 03)
00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:06.0 SCSI storage controller: Unknown device 9005:001f
00:09.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
00:0b.0 Ethernet controller: Hitachi Micro Systems: Unknown device 9050
=========================

As you see (from previous e-mail) the 3c905 card is recognized momentarily
during bootup but then it's not found by pciutils and nor does it get
recognized at eth0.
The following lines are from /proc/pci which confirm the above from lspci:

Bus 0, device 11, function 0:
Ethernet controller: Unknown vendor Unknown device (rev 0).
Vendor id=1037. Device id=0.
Medium devsel. IRQ 11. Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0xb800 [0xb801].