[tulip] 4 port ethernet card is freezing, after ifconfig it's OK
Tomas Holenda
Tomas.Holenda@openone.cz
Tue Mar 5 06:40:01 2002
Hi,
I have problem with 4-port ethernet card called ALLNET ALL0144. Approx.
once a day the card freezes.
When i type ifconfig on console i get as failure error fetching
interface: device not found. Then i type ifconfig again and nic are up.
I tried to replace the nic by other piece of the same type, byt the
problem persist, so I think it isn't hargware problem. Any ideas?
Thanks
Tomas.
OS:
Debian potato i386
Kernel:
manually compiled 2.4.18
the same situation was with manually compiled 2.4.7
cat /proc/interrupts:
CPU0
0: 49734449 XT-PIC timer
1: 4229 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
9: 60686742 XT-PIC eth0
10: 766799473 XT-PIC eth2, eth5
11: 220586862 XT-PIC eth4, eth1
12: 102593782 XT-PIC eth3
14: 3383672 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 0
MIS: 0
cat /proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
6100-61ff : ATI Technologies Inc 264VT [Mach64 VT]
6200-623f : 3Com Corporation 3c905 100BaseTX [Boomerang]
6200-623f : 00:0a.0
6300-631f : Intel Corp. 82557 [Ethernet Pro 100]
6300-631f : eepro100
e000-efff : PCI Bus #01
e000-e07f : Digital Equipment Corporation DECchip 21142/43
e000-e07f : tulip
e400-e47f : Digital Equipment Corporation DECchip 21142/43 (#2)
e400-e47f : tulip
e800-e87f : Digital Equipment Corporation DECchip 21142/43 (#3)
e800-e87f : tulip
ec00-ec7f : Digital Equipment Corporation DECchip 21142/43 (#4)
ec00-ec7f : tulip
f000-f00f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
cat /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430VX - 82437VX TVX [Triton VX] (rev 2).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (rev 0).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 8, function 0:
VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT]
(rev 64).
Non-prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
I/O at 0x6100 [0x61ff].
Bus 0, device 9, function 0:
PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 3).
Master Capable. Latency=32. Min Gnt=3.
Bus 0, device 10, function 0:
Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
(rev 0).
IRQ 11.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0x6200 [0x623f].
Bus 0, device 11, function 0:
Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 5).
IRQ 10.
Master Capable. Latency=32. Min Gnt=8.Max Lat=56.
Prefetchable 32 bit memory at 0xe1100000 [0xe1100fff].
I/O at 0x6300 [0x631f].
Non-prefetchable 32 bit memory at 0xe1000000 [0xe10fffff].
Bus 1, device 4, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(rev 65).
IRQ 9.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xe000 [0xe07f].
Non-prefetchable 32 bit memory at 0xdd000000 [0xdd0003ff].
Bus 1, device 5, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(#2) (rev 65).
IRQ 11.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xe400 [0xe47f].
Non-prefetchable 32 bit memory at 0xdd001000 [0xdd0013ff].
Bus 1, device 6, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(#3) (rev 65).
IRQ 10.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xe800 [0xe87f].
Non-prefetchable 32 bit memory at 0xdd002000 [0xdd0023ff].
Bus 1, device 7, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21142/43
(#4) (rev 65).
IRQ 12.
Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xec00 [0xec7f].
Non-prefetchable 32 bit memory at 0xdd003000 [0xdd0033ff].