[tulip] Osicom 123400-21 40port card

[Jason Marshall]

> That's likely a Seeq (now owned by LSI Logic) transceiver made on the
> 33rd week of 1996.  What is the correct part number?  80222 is possible.

Here's ALL the numbers:  NQ80C269633, no question about it...

There are four other chips that look similar, but have different numbers
on them:

FS9524AP/DP83223V/B
FS9542AF/DP83223V/B
FS9542APE4/DP83223V/B
FS9542ATC4/DP83223V/B

I don't know who made them, but their logo looks like a sideways N or Z
with the ends of the letter curled in.  Could these be national
semiconductor TWISTER transceiver chips?  Google thinks they might be!

> > Should I give the new 0.95 version a go?  
> 
> Yes.

Will do.

> What is the full driver detection message?

tulip.c:v0.93 11/7/2001  Written by Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/tulip.html
eth0: Digital DS21140A Tulip rev 34 at 0xd4840000, 00:00:BC:11:31:A8, IRQ 10.
eth0:  EEPROM default media type Autosense.
eth0:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth0:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
eth0:  Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
eth0:  Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
eth1: Digital DS21140A Tulip rev 34 at 0xd4842000, 00:00:BC:11:31:A9, IRQ 12.
eth1:  EEPROM default media type Autosense.
eth1:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth1:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
eth1:  Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
eth1:  Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
eth2: Digital DS21140A Tulip rev 34 at 0xd4844000, 00:00:BC:11:31:AA, IRQ 11.
eth2:  EEPROM default media type Autosense.
eth2:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth2:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
eth2:  Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
eth2:  Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
eth3: Digital DS21140A Tulip rev 34 at 0xd4846000, 00:00:BC:11:31:AB, IRQ 7.
eth3:  EEPROM default media type Autosense.
eth3:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
eth3:  Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
eth3:  Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
eth3:  Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.

> Is the driver built-in or a module?

Module -- I know I saw the docs for configuring that in the /etc/modules
file or whatever, but you know, I just can't find it today.  Hint?

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
| Jason Marshall, marshalj@spots.ab.ca. Spots InterConnect, Inc. Calgary, AB |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-