[tulip] Asante PNIC II problems
Fri Feb 1 17:07:01 2002
Im an triying to work whit an AsanteFAST 10/100 PCI Rev. B card
, have tried under many kernel-driver conbinations whit diferent error msgs but
same vehaboir, it only works whit autoselect media (options=0) but
when some trafic is sent trougth the card error msgs come and i only
can get about 2-3Ks, sometimes nothing at all.
if i do a ifdown eth0, ifup eth0 it works agayn until some data
(about 1MB) is trasmited and error msgs come agayn.
Here is the info, the machine is a power mac runing kernel 2.4.18:
Feb 1 14:24:05 localhost kernel: tulip.c:v0.93 11/7/2001 Written by
Donald Becker <email@example.com>
Feb 1 14:24:05 localhost kernel: http://www.scyld.com/network/tulip.html
Feb 1 14:24:05 localhost kernel: The PCI BIOS has not enabled the
device at 0/112! Updating PCI command 0080->0086.
Feb 1 14:24:05 localhost kernel: eth0: Lite-On LC82C115 PNIC-II rev
37 at 0xc788c000, 00:00:94:B6:B3:8E, IRQ 25.
Feb 1 14:24:06 localhost pumpd: starting at Fri Feb 1 14:24:06 2002
Feb 1 14:24:06 localhost pumpd: configured interface eth0
Feb 1 14:24:09 localhost kernel: eth0: Restarted Rx at 87 / 87.
Feb 1 14:24:09 localhost kernel: eth0: N-Way autonegotiation status
Feb 1 14:24:10 localhost kernel: eth0: Restarted Rx at 119 / 119.
Feb 1 14:24:11 localhost kernel: eth0: Restarted Rx at 151 / 151.
Feb 1 14:24:12 localhost kernel: eth0: Restarted Rx at 183 / 183.
Feb 1 14:24:14 localhost kernel: eth0: Restarted Rx at 215 / 215.
Feb 1 14:24:15 localhost kernel: eth0: Restarted Rx at 248 / 248.
and error msgs continue until i put it down
i think that N-Way is not working good because the swich is reporting 100MB FDX
i have noted in the card leds (link, FDX, 100MB, ACT) with the tulip
driver that the FDX led blinks like the ACT one. it is conected to a
10/100 swich and it reports 100MB FDX. Under mac/os or windows the
card leds work normally so i think is a driver problem.
triying now tulip-diag to get more info on whats hapening in the
card, any help whould be apreciated