[tulip] IRQ not found (KMM238283C0KM)

Donald Becker becker@scyld.com
Wed, 14 Mar 2001 08:02:57 -0500 (EST)

On Wed, 14 Mar 2001, Michael K. Brown wrote:

> > We have a Netgear FA310TX NIC installed in a HP Pavilion 8650C that runs
> > both Windows 98 and Linux (RedHat 7.0).  The card works correctly under
> > Windows with IRQ=11, but both the RedHat tulip driver module and the
> > Netgear supplied drivers fail to properly set the IRQ, which is left set
> > at 0.  It otherwise appears to correctly probe the card for addresses,
> > etc. according to dmesg output.
> The RH7 is a partitionless installation (I don't know if this matters).
> I downloaded and installed the latest tulip driver.  Same result:
> tulip.c:v0.92 4/17/2000  Written by Donald Becker <becker@scyld.com>
>   http://www.scyld.com/network/tulip.html
> eth0: Lite-On 82c168 PNIC rev 32 at 0xcc00b000, 00:A0:CC:60:38:2E, IRQ
> 0.

If you would have run 'tulip-diag' from
it would have told you to read
for the solution:  Change your BIOS setup.

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993