[tulip] Kingston KNE111TX Full Duplex LED

[Donald Becker]

On Fri, 2 Mar 2001, John Connett wrote:
> John Connett wrote:
> > 
> > Donald Becker wrote:
> > > There isn't a general patch that will work for all boards, but please
> > > try adding the following two lines around line 780
> > > +       else if (chip_idx == PNIC2)
> > > +               outl(0xf0000000, ioaddr + CSR9);
> > >
> > > If this setting isn't somewhere in the EEPROM I'll have to add a new
> > > subsystem ID specific flag for this board.
> > 
> > Thanks for the swift reply.  I have tried this change applied to the
> > v0.92t driver and it appears to have no effect.  The Full Duplex LED
> > still flashes in time with the Activity LED but with a slight delay.
> 
> Don't know if this will help, but I inserted a printk to output the
> value of CSR9 before and after the outl.  Here are the values:
> 
>     eth1: before: 0x00fecf00
>     eth1: after : 0xf0fe87ff

The 'tulip-diag -a' program will tell you if the change persists during
operation.  I'll put a PNIC2 in my test machine later today to see what
happens.

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993