[tulip] Tulip

[Matthew]

What happens with lspci and insmod tulip?

Does the pci-scan module load? Which driver version are you using?

Actually, I had a problem with the tulip driver not seeing the device 
either.....But not tried since I re-installed my OS whilst trying to get an 
Nvidia geforce2 GTS working....

Take it you have installed the newest set of device drivers (the one for RH7).

lspci most likely see's it there....Maybe pci-scan is not loading for some 
reason?

Matt

On Monday 29 January 2001 07:24 pm, Jasiel Spelman wrote:
> That's the thing though, it doesn't work, it doesn't even recognize that it
> is there
> J
>
> Matthew wrote:
> > Hold on, its working, but its not the correct driver? The fact that its
> > working is I deem a good indication that you have the correct module
> > loading (tulip.o).
> > The Linux modules most of these cards come with are pretty old anyhow, so
> > no loss there. If you need more detailed information then look at
> > www.scyld.com/network/tulip.html
> >
> > Matt
> >
> > Offtopic: Any plans for having Scyld merchandise?
> >
> > On Monday 29 January 2001 04:56 pm, Jasiel Spelman wrote:
> > > I have Redhat 7.0 with the 2.4 kernel. I have a Linksys LNE100TX
> > > ETHERFAST 10/100 LAN card, and I get get it to work in Linux.  The main
> > > problem that I am having is that I can't get correct drivers for the
> > > instructions that I find. Also, my card didn't come with a Linux
> > > driver, please help.
> > >
> > > Jason
> > >
> > >
> > > _______________________________________________
> > > tulip mailing list
> > > tulip@scyld.com
> > > http://www.scyld.com/mailman/listinfo/tulip