[tulip] W-LINX LinxPRO Ethernet

[Michael Thaler]

On Wed, Dec 12, 2001 at 01:03:35PM -0500, Donald Becker wrote:

> What is the detection message, including the driver version?

Linux PCMCIA Card Services 3.1.29
  kernel build: 2.4.16 #2 Die Dez 11 10:47:33 CET 2001
  options:  [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 9 for device 00:0c.0
PCI: Found IRQ 9 for device 00:0c.1
PCI: Sharing IRQ 9 with 00:0a.0
  Ricoh RL5C478 rev 80 PCI-to-CardBus at slot 00:0c, mem 0x10000000
    host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 2/5]
    host opts [1]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 6/9]
    ISA irqs (default) = 3,4,5,7,10 PCI status changes
cs: cb_alloc(bus 2): vendor 0x13d1, device 0xab08
cs: cb_config(bus 2)
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x398-0x39f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0230-0x032f: clean.
cs: IO port probe 0x0338-0x0377: clean.
cs: IO port probe 0x0380-0x0387: clean.
cs: IO port probe 0x0390-0x0397: clean.
cs: IO port probe 0x03a0-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
  fn 0 bar 1: io 0x800-0x8ff
  fn 0 bar 2: mem 0x60060000-0x600603ff
  fn 0 rom: mem 0x60040000-0x6005ffff
  irq 9
cs: cb_enable(bus 2)
  bridge io map 0 (flags 0x21): 0x800-0x8ff
  bridge mem map 0 (flags 0x1): 0x60040000-0x60060fff
tulip_attach(device 02:00.0)
tulip.c:v0.91g-ppc 7/16/99 becker@scyld.com (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Digital DS21143 Tulip rev 17 at 0x800, EEPROM not present, 00:4C:69:6E:75:79, IRQ 9.
eth0:  MII transceiver #1 config 3000 status 7849 advertising 01e1.
eth0: 21143 10mbps sensed media.
eth0: 21143 10baseT link beat good.

The card works fine with Win2000 in my network on the same
computer. When I send any packets with the linux drivers to my other
computers ping tells me that all the packets are lost. It would be
nice to get the card working, because it is pretty cheap.

Thanks, Michael