[tulip] Tulip: PCI Fatal Bus Error

[Donald Becker]

On Sat, 26 Aug 2000 KevinSCarr@aol.com wrote:

> I have been trying to set up a LinkSys Network Everywhere 10/100 Ethernet 
> Card.  Model NC100 Version 2.0.
> 
> After building the Binary files, and installing them, I get the following 
> error:
> eth0:  PCI Fatal Bus Error, fc67e050

Yup, that's a PCI bus errors.  It's one of
bit  27:25  error type
      000 parity error
      001 master abort
      010 target abort

So it's probably a parity error.
Try moving the card to a different PCI slot.


Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Beowulf-II Cluster Distribution
Annapolis MD 21403