[tulip] Problems with ANA6944A 4port card
Dr. Andreas Schrimpf
Andreas.Schrimpf@Physik.Uni-Marburg.DE
Tue, 08 Aug 2000 16:18:34 +0200
This is a multi-part message in MIME format.
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Hi,
I am fighting since two weeks to get the Adaptec 4port NIC
ANA6944A/TX running with SuSE Linux 6.4.
The problems:
1) With only the Adaptec card in the computer
everyone of the 4 ports will run, if I deactivate the others, but never
all 4 are working all together. In the later case
somehow networking seems to be routed
to the first port, sometimes to the first and to the last
(checked by "netstat -aiu" and disconnecting the twisted pair cables)
even though all 4 ports (MAC addresses) have a separat
IP address which I used for ftp and ping tests.
2) Including a 3Com 900b card leeds to a re-routing to this
port and a noticeable drop in performance.
The configuration:
mainboard: ASUS PSB-S rev 1.03
Adaptec ANA6944A/TX 4port NIC, no FAB 1683707-00 REV C
with following chip numbers:
label on one chip: ANA-6944A/TX 1697400 A 9940
4 * digital 21140-AF, 21-43864-04 DEC 1996, DC1064C S 9918 JL5234
4 * MS9939AD DP83840AVCE
4 * ES9928AD DP83223V
For test-configuration: 3Com 900b-Combo
network connection to a catalyst switch with fixed port configuration,
i.e. 4 times 100 MHz, full duplex and for testing (3Com 900b Combo)
10 MHz, half duplex.
Drivers are compiled as modules, I got the latest driver-update package.
Status of the machine:
I copied several status messages. The machine was booted
with the 3Com card as eth0, and eht1 and eth4 activated.
You will find:
file "raid" contains a copy of "/etc/modules" and "/var/log/messages"
file "ifconfig_tab" the answer of "ifconfig"
file "rout_tab" the answer of "route"
files "proc_int, .._io, .._pci" the answers of "cat /proc/interrups", "cat
/proc/ioports" and "cat
/proc/pci"
file "tulip_diag-ee" the answer of "tulip-diag -ee"
files "mii-diag_ethx" the answers of "mii-diag ethx" with x=1,2,3,4
I hope, someone can give me some hints to get
the card working fine.
Best
Andreas
--
----------------------------------------------------------------------
Priv. Doz. Dr. Andreas Schrimpf
Philipps-Universität Marburg
Fachbereich Physik
Mainzer Gasse 33
D-35032 Marburg
Tel: 49-(0)6421-28-21338
Fax: 49-(0)6421-28-27076
EMail: Andreas.Schrimpf@Physik.Uni-Marburg.DE
----------------------------------------------------------------------
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="raid"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="raid"
/etc/modules
alias eth0 3c90x
options 3c90x media_select=3
alias eth1 tulip
alias eth2 tulip
alias eth3 tulip
alias eth4 tulip
options tulip debug=2 options=14,14,14,14 full_duplex=1,1,1,1
/var/log/messages
Aug 8 08:31:10 pcraid kernel: 3Com 3c90x Version 1.0.0i 1999 <linux_drivers@3com.com>
---------------------------------
Aug 8 08:31:10 pcraid kernel: tulip.c:v0.92 4/17/2000 Written by Donald Becker <becker@scyld.com>
Aug 8 08:31:10 pcraid kernel: http://www.scyld.com/network/tulip.html
Aug 8 08:31:10 pcraid kernel: eth1: Digital DS21140 Tulip rev 34 at 0xd003c000, 00:00:D1:1E:96:AD, IRQ 11.
Aug 8 08:31:10 pcraid kernel: eth1: EEPROM default media type Autosense.
Aug 8 08:31:10 pcraid kernel: eth1: MII interface PHY 0, setup/reset sequences 1/1 long, capabilities 78 00.
Aug 8 08:31:10 pcraid kernel: eth1: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
Aug 8 08:31:10 pcraid kernel: eth1: Using media type MII, CSR12 is 00.
Aug 8 08:31:10 pcraid kernel: eth1: MII transceiver #1 config 3100 status 7849 advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth1: Advertising 0100 on PHY 1, previously advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth2: Digital DS21140 Tulip rev 34 at 0xd003e000, EEPROM not present, 00:00:D1:1E:96:AE, IRQ 11.
Aug 8 08:31:10 pcraid kernel: eth2: Controller 1 of multiport board.
Aug 8 08:31:10 pcraid kernel: eth2: EEPROM default media type Autosense.
Aug 8 08:31:10 pcraid kernel: eth2: MII interface PHY 0, setup/reset sequences 1/1 long, capabilities 78 00.
Aug 8 08:31:10 pcraid kernel: eth2: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
Aug 8 08:31:10 pcraid kernel: eth2: Using media type MII, CSR12 is 00.
Aug 8 08:31:10 pcraid kernel: eth2: MII transceiver #1 config 3100 status 7849 advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth2: Advertising 0100 on PHY 1, previously advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth3: Digital DS21140 Tulip rev 34 at 0xd0040000, EEPROM not present, 00:00:D1:1E:96:AF, IRQ 11.
Aug 8 08:31:10 pcraid kernel: eth3: Controller 2 of multiport board.
Aug 8 08:31:10 pcraid kernel: eth3: EEPROM default media type Autosense.
Aug 8 08:31:10 pcraid kernel: eth3: MII interface PHY 0, setup/reset sequences 1/1 long, capabilities 78 00.
Aug 8 08:31:10 pcraid kernel: eth3: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
Aug 8 08:31:10 pcraid kernel: eth3: Using media type MII, CSR12 is 00.
Aug 8 08:31:10 pcraid kernel: eth3: MII transceiver #1 config 3100 status 7849 advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth3: Advertising 0100 on PHY 1, previously advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth4: Digital DS21140 Tulip rev 34 at 0xd0042000, EEPROM not present, 00:00:D1:1E:96:B0, IRQ 11.
Aug 8 08:31:10 pcraid kernel: eth4: Controller 3 of multiport board.
Aug 8 08:31:10 pcraid kernel: eth4: EEPROM default media type Autosense.
Aug 8 08:31:10 pcraid kernel: eth4: MII interface PHY 0, setup/reset sequences 1/1 long, capabilities 78 00.
Aug 8 08:31:10 pcraid kernel: eth4: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
Aug 8 08:31:10 pcraid kernel: eth4: Using media type MII, CSR12 is 00.
Aug 8 08:31:10 pcraid kernel: eth4: MII transceiver #1 config 3100 status 7849 advertising 0101.
Aug 8 08:31:10 pcraid kernel: eth4: Advertising 0100 on PHY 1, previously advertising 0101.
----------------------------
Aug 8 08:31:10 pcraid kernel: eth1: tulip_open() irq 11.
Aug 8 08:31:10 pcraid kernel: eth1: Using user-specified media MII 100baseTx-FDX.
Aug 8 08:31:10 pcraid kernel: eth1: Advertising 0100 on MII 1.
Aug 8 08:31:10 pcraid kernel: eth1: Using media type MII, CSR12 is 00.
Aug 8 08:31:10 pcraid kernel: eth4: tulip_open() irq 11.
Aug 8 08:31:10 pcraid kernel: eth4: Using user-specified media MII 100baseTx-FDX.
Aug 8 08:31:10 pcraid kernel: eth4: Advertising 0100 on MII 1.
Aug 8 08:31:10 pcraid kernel: eth4: Using media type MII, CSR12 is 00.
------------------
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="ifconfig_tab"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ifconfig_tab"
eth0 Link encap:Ethernet HWaddr 00:10:5A:3C:2A:A0
inet addr:137.248.131.137 Bcast:137.248.131.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:18019 errors:4040 dropped:0 overruns:0 frame:4040
TX packets:8241 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:10 Base address:0xb000
eth1 Link encap:Ethernet HWaddr 00:00:D1:1E:96:AD
inet addr:137.248.131.202 Bcast:137.248.131.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0xc000
eth4 Link encap:Ethernet HWaddr 00:00:D1:1E:96:B0
inet addr:137.248.131.205 Bcast:137.248.131.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:414 errors:0 dropped:0 overruns:0 frame:0
TX packets:414 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="route_tab"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="route_tab"
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
137.248.131.0 * 255.255.255.0 U 0 0 0 eth0
137.248.131.0 * 255.255.255.0 U 0 0 0 eth1
137.248.131.0 * 255.255.255.0 U 0 0 0 eth4
loopback * 255.0.0.0 U 0 0 0 lo
default cirz070423.HRZ. 0.0.0.0 UG 0 0 0 eth0
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="proc_int"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="proc_int"
CPU0
0: 410454 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 3506 XT-PIC aic7xxx
8: 2 XT-PIC rtc
10: 25703 XT-PIC eth0
11: 8 XT-PIC eth1, eth4
12: 0 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
15: 45 XT-PIC aic7xxx
NMI: 0
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="proc_io"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="proc_io"
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
b000-b07f : 3Com EtherLink PCI NIC
b400-b4fe : aic7xxx
d000-d0fe : aic7xxx
d003c000-d003c07f : eth1
d003e000-d003e07f : eth2
d0040000-d004007f : eth3
d0042000-d004207f : eth4
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="proc_pci"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="proc_pci"
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe4000000 [0xe4000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
Medium devsel. Master Capable. Latency=64. Min Gnt=128.
Bus 0, device 4, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 4, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xd800 [0xd801].
Bus 0, device 4, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. Latency=32.
I/O at 0xd400 [0xd401].
Bus 0, device 4, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 6, function 0:
SCSI storage controller: Adaptec AIC-7890/1 (rev 0).
Medium devsel. Fast back-to-back capable. BIST capable. IRQ 5. Master Capable. Latency=32. Min Gnt=39.Max Lat=25.
I/O at 0xd000 [0xd001].
Non-prefetchable 64 bit memory at 0xe3000000 [0xe3000004].
Bus 0, device 9, function 0:
VGA compatible controller: ATI Mach64 GT (Rage II) (rev 154).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Min Gnt=8.
Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000000].
I/O at 0xb800 [0xb801].
Non-prefetchable 32 bit memory at 0xe1800000 [0xe1800000].
Bus 0, device 10, function 0:
SCSI storage controller: Adaptec AHA-2940U2 (rev 0).
Medium devsel. Fast back-to-back capable. BIST capable. IRQ 15. Master Capable. Latency=32. Min Gnt=39.Max Lat=25.
I/O at 0xb400 [0xb401].
Non-prefetchable 64 bit memory at 0xe1000000 [0xe1000004].
Bus 0, device 11, function 0:
Ethernet controller: 3Com Unknown device (rev 4).
Vendor id=10b7. Device id=9005.
Medium devsel. IRQ 10. Master Capable. Latency=32. Min Gnt=10.Max Lat=48.
I/O at 0xb000 [0xb001].
Non-prefetchable 32 bit memory at 0xe0800000 [0xe0800000].
Bus 0, device 12, function 0:
PCI bridge: DEC DC21152 (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Min Gnt=4.
Bus 2, device 4, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xa800 [0xa801].
Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000].
Bus 2, device 5, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xa400 [0xa401].
Non-prefetchable 32 bit memory at 0xdf800000 [0xdf800000].
Bus 2, device 6, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 15. Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0xa000 [0xa001].
Non-prefetchable 32 bit memory at 0xdf000000 [0xdf000000].
Bus 2, device 7, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. Latency=32. Min Gnt=20.Max Lat=40.
I/O at 0x9800 [0x9801].
Non-prefetchable 32 bit memory at 0xde800000 [0xde800000].
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="tulip_diag-ee"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="tulip_diag-ee"
tulip-diag.c:v1.19 10/2/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Index #1: Found a Digital DS21140 Tulip adapter at 0xa800.
Port selection is MII, full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit threshold is 128.
EEPROM size is 6.
PCI Subsystem IDs, vendor 1109, device 2400.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:00:D1:1E:96:AD.
EEPROM transceiver/media description for the Digital DS21140 Tulip chip.
Leaf node at offset 40, default media type 0800 (Autosense).
CSR12 direction setting bits 0x3f.
1 transceiver description blocks:
Media MII, block type 1, length 14.
MII interface PHY 0 (media type 11).
21140 MII Reset sequence is 2 words: 01 00.
21140 MII initialization sequence is 1 words: 00.
Media capabilities are 7800, advertising 01e1.
Full-duplex map 5000, Threshold map 1800.
EEPROM contents:
1109 2400 0000 0000 0000 0000 0000 0000
0005 0403 0000 1ed1 ad96 2804 0500 0028
2806 0700 0028 0000 0800 013f 018e 0100
0200 0001 7800 01e0 5000 1800 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0724 c1a2
ID block CRC 0x05 (vs. 0x05).
Full contents CRC 0xc1a2 (read as 0xc1a2).
MII PHY found at address 1, status 0x7849.
MII PHY #1 transceiver registers:
3100 7849 2000 5c01 0100 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 00a0 0000 0000 0001 8060
8020 0c61 0000 1000 a3b9 0084 4205 001b.
Index #2: Found a Digital DS21140 Tulip adapter at 0xa400.
Port selection is 10mpbs-serial, half-duplex.
Transmit stopped, Receive stopped, half-duplex.
The Rx process state is 'Stopped'.
The Tx process state is 'Stopped'.
The transmit threshold is 72.
EEPROM size is 8.
WARNING: The EEPROM is missing or erased!
This interface is missing the EEPROM.
This is likely the non-primary interface on a multiport board.
EEPROM contents:
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ID block CRC 0xfa (vs. 0xff).
Full contents CRC 0x6a15 (read as 0xffff).
MII PHY found at address 1, status 0x7849.
MII PHY #1 transceiver registers:
3100 7849 2000 5c01 0100 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0001 8060
8020 0c61 0000 1800 a3b9 0084 4e05 001b.
Index #3: Found a Digital DS21140 Tulip adapter at 0xa000.
Port selection is 10mpbs-serial, half-duplex.
Transmit stopped, Receive stopped, half-duplex.
The Rx process state is 'Stopped'.
The Tx process state is 'Stopped'.
The transmit threshold is 72.
EEPROM size is 8.
WARNING: The EEPROM is missing or erased!
This interface is missing the EEPROM.
This is likely the non-primary interface on a multiport board.
EEPROM contents:
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ID block CRC 0xfa (vs. 0xff).
Full contents CRC 0x6a15 (read as 0xffff).
MII PHY found at address 1, status 0x7849.
MII PHY #1 transceiver registers:
3100 7849 2000 5c01 0100 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0001 8060
8020 0c61 0000 1800 a3b9 0083 5405 001b.
Index #4: Found a Digital DS21140 Tulip adapter at 0x9800.
Port selection is MII, full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit threshold is 128.
EEPROM size is 8.
WARNING: The EEPROM is missing or erased!
This interface is missing the EEPROM.
This is likely the non-primary interface on a multiport board.
EEPROM contents:
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff ffff ffff ffff ffff ffff ffff
ID block CRC 0xfa (vs. 0xff).
Full contents CRC 0x6a15 (read as 0xffff).
MII PHY found at address 1, status 0x7849.
MII PHY #1 transceiver registers:
3100 7849 2000 5c01 0100 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0001 8060
8020 0c61 0000 1800 a3b9 0083 4a05 001b.
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="mii-diag_eth1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mii-diag_eth1"
Basic registers of MII PHY #1: 3100 7849 2000 5c01 0100 0000 0000 0000.
Basic mode control register 0x3100: Auto-negotiation enabled.
Basic mode status register 0x7849 ... 7849.
Link status: not established.
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="mii-diag_eth2"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mii-diag_eth2"
Basic registers of MII PHY #1: 3100 7849 2000 5c01 0100 0000 0000 0000.
Basic mode control register 0x3100: Auto-negotiation enabled.
Basic mode status register 0x7849 ... 7849.
Link status: not established.
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="mii-diag_eth3"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mii-diag_eth3"
Basic registers of MII PHY #1: 3100 7849 2000 5c01 0100 0000 0000 0000.
Basic mode control register 0x3100: Auto-negotiation enabled.
Basic mode status register 0x7849 ... 7849.
Link status: not established.
--------------37518063FB642CD7E570967C
Content-Type: text/plain; charset=us-ascii;
name="mii-diag_eth4"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mii-diag_eth4"
Basic registers of MII PHY #1: 3100 7849 2000 5c01 0100 0000 0000 0000.
Basic mode control register 0x3100: Auto-negotiation enabled.
Basic mode status register 0x7849 ... 7849.
Link status: not established.
--------------37518063FB642CD7E570967C--