eth0 transmit timed out

[Donald Becker]

On Tue, 26 Oct 1999, Morrell, Mike wrote:

> I just installed Mandrake 6.0. Configured the NIC during setup and rebooted.
> I get this message:
>    eth0: transmit timed out, status e4260000, CSR12 40a1d0cc, resetting...
> It repeats over and over every 5 seconds. Anyone have any clue what this is
> caused by. Here is my system.
> MX98715 (Macronix) based NIC

What driver version? You should be using v0.91g or later with the Macronix
chips.
    http://cesdis.gsfc.nasa.gov/linux/drivers/tulip.html
      ftp://cesdis.gsfc.nasa.gov/pub/linux/drivers/test/tulip.c


Donald Becker
Scyld Computing Corporation, and
USRA-CESDIS,   becker@cesdis.gsfc.nasa.gov