4-Port Tulip Card w/ Linux 2.0.36
Nick Eggleston
nick@dccinc.com
Tue Mar 16 12:45:26 1999
I have a Matrox Shark, which is a 4-port Tulip card.
I am using the tulip.90Q driver.
I keep getting:
# ifconfig eth1 10.1.1.1
SIOCSIFFLAGS: Resource temporarily unavailable
I just keep getting those messages every time I try to configure the
interface.
Any Ideas?
Kernel messages:
3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0x6c00, 00:10:5a:ac:3c:60, IRQ 9
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation interface.
Enabling bus-master transmits and whole-frame receives.
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.
Appletalk 0.17 for Linux NET3.035
tulip.c:v0.90q 2/23/99 becker@cesdis.gsfc.nasa.gov
eth1: Digital DS21140 Tulip rev 18 at 0xe000, EEPROM not present, 00:4C:69:6E:75:79, IRQ 0.
eth1: Old style EEPROM with no media selection information.
eth1: MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth2: Digital DS21140 Tulip rev 18 at 0xe400, EEPROM not present, 00:4C:69:6E:75:7A, IRQ 0.
eth2: EEPROM default media type 10baseT.
eth3: Digital DS21140 Tulip rev 18 at 0xe800, EEPROM not present, 00:4C:69:6E:75:7B, IRQ 0.
eth3: Old style EEPROM with no media selection information.
eth3: MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth4: Digital DS21140 Tulip rev 18 at 0xec00, EEPROM not present, 00:4C:69:6E:75:7C, IRQ 0.
eth4: Old style EEPROM with no media selection information.
eth4: MII transceiver #1 config 3100 status 7809 advertising 01e1.
/proc/pci:
PCI devices found:
Bus 0, device 13, function 0:
Ethernet controller: 3Com 3C905B 100bTX (rev 48).
Medium devsel. IRQ 9. Master Capable. Latency=64. Min Gnt=10.Max Lat=10.
I/O at 0x6c00.
Non-prefetchable 32 bit memory at 0xe0101000.
Bus 1, device 12, function 0:
Ethernet controller: DEC DC21140 (rev 18).
Medium devsel. Fast back-to-back capable. IRQ 12. Master Capable. Latency=64.
I/O at 0xec00.
Non-prefetchable 32 bit memory at 0xd8003000.
Bus 1, device 9, function 0:
Ethernet controller: DEC DC21140 (rev 18).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64.
I/O at 0xe800.
Non-prefetchable 32 bit memory at 0xd8002000.
Bus 1, device 8, function 0:
Ethernet controller: DEC DC21140 (rev 18).
Medium devsel. Fast back-to-back capable. IRQ 12. Master Capable. Latency=64.
I/O at 0xe400.
Non-prefetchable 32 bit memory at 0xd8001000.
Bus 1, device 5, function 0:
Ethernet controller: DEC DC21140 (rev 18).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64.
I/O at 0xe000.
Non-prefetchable 32 bit memory at 0xd8000000.
Bus 0, device 11, function 0:
PCI bridge: DEC DC21052 (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. Min Gnt=7.
Bus 0, device 9, function 0:
Ethernet controller: Intel 82557 (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=64. Min Gnt=8.Max Lat=56.
Prefetchable 32 bit memory at 0xe0100000.
I/O at 0x6800.
Non-prefetchable 32 bit memory at 0xe0000000.
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 1).
Medium devsel. Fast back-to-back capable.
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64.
I/O at 0x6400.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xf000.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 0, function 0:
Host bridge: Intel 82439TX (rev 1).
Medium devsel. Master Capable. Latency=64.