[tulip-bug] cnet, linksys, and tulip

Balazs Sallay balazssallay@yahoo.com
Wed, 13 Jun 2001 18:08:48 -0700 (PDT)


Thank you, this solved the problem.

--- Donald Becker <becker@scyld.com> wrote:
> On Wed, 13 Jun 2001, Balazs Sallay wrote:
> 
> > I have a CNet Pro 200 card, which worked just fine with the
> > dmfe.o module under Suse 7.0 and 2.2.16. I recently put
> there a
> > Linksys LNE100TXv4 card as eth1 and tried to use it with the
> > tulip driver, but the two driver didn't work at the same
> time. I
> > suspect that the tulip driver tries to manage the CNet card
> on
> > eth0, but it can't.
> 
> The Tulip driver does detect the Davicom chip, but you should
> use the
> dmfe driver instead.  The dmfe driver has various ugly
> work-arounds for
> bugs that I'm not willing to put in the critical path of the
> standard
> Tulip driver.
> 
> > Same problems with kernel 2.4.5, though once
> > in many times it looked like the tulip driver (with the
> absence
> > of dmfe) managed the CNet card correctly. Is there a way to
> tell
> > the tulip driver to leave the CNet card alone? 
> 
> Remove the two Davicom identification lines from tulip.c.
> 
> I will likely make that change in the standard driver source.
> 
> Donald Becker				becker@scyld.com
> Scyld Computing Corporation		http://www.scyld.com
> 410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
> Annapolis MD 21403			410-990-9993
> 


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/