[realtek] RTL8100B non-functioning

Donald Becker becker@scyld.com
Tue Oct 8 23:33:00 2002


On Wed, 9 Oct 2002, Orlando Andico wrote:

> I've made (some) progress here.. basically eth0 *has* to be an
> eepro100.

That shouldn't be required.

> and eth1 is 8139too.

Have you tried the rtl8139 driver?

mkdir /tmp/netdrivers/
cd /tmp/netdrivers/
ncftp ftp://ftp.scyld.com/pub/network/netdrivers.tgz
tar xfvz netdrivers.tgz
make
make install

> 'mii-tool -w' returns correct link state for both ethernet ports.  

You can use use 'mii-diag --watch eth0' to monitor the link and
negotiation status.


-- 
Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993