[realtek] dhcp problem with realtek 8139 clone

Rasse Gunnar razo@zephirus.net
Thu, 3 May 2001 19:13:07 +0200


Hi,

I have som problem with my realtek 8139 clone. It won't work with dhcp
against my isp. I've just installed redhat 7.1 on a i386 with to (exactly
the same) network cards, one that should be connected to my isp, and one to
the local network. My local network works fine, but when I try to start eth0
(which is the card connecting to my isp) I get

Determining IP configuration... Operation failed.
   failed.

If I manually try to run 'pump -i eth0' I also get Operation failed.

If I run 'mii-tool -v eth0' I get

eth0: autonegotiation failed, link ok
  product info: vendor 00:00:00, model 0 rev 0
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

I've tried using the rtl8139 as well as the 8139too driver shipped with
redhat 7.1, and I'm trying to connect via a cable modem.

My dmesg looks a bit strange too, I get som messages several times.

8139too Fast Ethernet driver 0.9.16
eth0: RealTek RTL8139 Fast Ethernet at 0xc4802000, 00:10:a7:08:2c:70, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139C'
eth1: RealTek RTL8139 Fast Ethernet at 0xc4804000, 00:10:a7:07:fc:83, IRQ 10
eth1:  Identified 8139 chip type 'RTL-8139C'
...
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding Swap: 265032k swap-space (priority -1)
keyboard: Timeout - AT keyboard not present?
parport0: PC-style at 0x378 [PCSPP(,...)]
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth1: Setting 100mbps full-duplex based on auto-negotiated partner ability
41e1.
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
keyboard: Timeout - AT keyboard not present?
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.

Is this normal?

Can anybody please help getting the card to work?

Rgds,

Rasmus