[realtek] Can't load RTL8139.o module Rhat 7.0

Donald Becker becker@scyld.com
Thu, 16 Nov 2000 00:04:38 -0500 (EST)


On Wed, 15 Nov 2000, Mariano Mendez wrote:

> I have a PCMCIA Ethernet Card L100C32 2 10/100 Mbps 32 bits from
> Dynalink. I'm trying to make it work on a Sony VAIO SR1K running
> Redhat 7.0, kernel 2.2.16-22 using pcmcia-cs-3.1.22.

[[ Various failed approaches deleted. ]]

> Nov 15 18:19:28 pan cardmgr[443]: unsupported card in socket 0
> Nov 15 18:19:28 pan kernel: cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138
> Nov 15 18:19:29 pan cardmgr[443]:   product info: "PCMCIA", "CardBus Ethernet 10
> /100 (R5)"
> Nov 15 18:19:29 pan cardmgr[443]:   manfid: 0x0260, 0x0235  function: 6 (network

Update your driver using the directions in
   http://www.scyld.com/network/updates.html

This is supported by the following lines:

________________
# The CardBus version of the RealTek rtl8139b.
device "realtek" class "network"
    module "cb_enabler", "pci-scan", "cb_shim", "rtl8139"

card "Argosy EN235 RTL8139B"           manfid 0x0260, 0x0235  bind "realtek"
________________


This card is supported out of the box by the Scyld Beowulf distribution.


Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993