Invalid EEPROM checksum on 1.09j-t

[Jason Goldschmidt]

On Sat, 6 May 2000, Donald Becker wrote:


> What does v1.10 report?
>   http://www.scyld.com/network/index.html
>     ftp://scyld.com/pub/network/netdrivers-2.0.src.rpm

May  6 20:21:59 dieselmeat kernel: eepro100.c:v1.10a 4/15/00 Donald Becker <becker@scyld.com> 
May  6 20:21:59 dieselmeat kernel:   http://www.scyld.com/network/eepro100.html 
May  6 20:21:59 dieselmeat kernel: eth0: Invalid EEPROM checksum 0x9bfd, check settings before activating this device! 
May  6 20:21:59 dieselmeat kernel: eth0: Intel PCI EtherExpress Pro100 at 0xc6870000, 00:F0:ED:3D:F3:E1, IRQ 9. 
May  6 20:21:59 dieselmeat kernel:   Board assembly 771d6d-134, Physical connectors present: RJ45 
May  6 20:21:59 dieselmeat kernel:   Primary interface chip unknown-15 PHY #1. 
May  6 20:21:59 dieselmeat kernel:   General self-test: passed. 
May  6 20:21:59 dieselmeat kernel:   Serial sub-system self-test: passed. 
May  6 20:21:59 dieselmeat kernel:   Internal registers self-test: passed. 
May  6 20:21:59 dieselmeat kernel:   ROM checksum self-test: passed (0x49caa8d6). 
May  6 20:21:59 dieselmeat kernel:   Receiver lock-up workaround activated. 


same result w/ 1.10a

Thanks, 

-Jason

> 
> Donald Becker				becker@scyld.com
> Scyld Computing Corporation
> 410 Severn Ave. Suite 210
> Annapolis MD 21403
> 
> 
> 

*************************************)
Jason Goldschmidt  jgoldsch@acm.org *)
http://coral.bucknell.edu/~jgoldsch *)
"My Reality Check Bounced"          *)
                -Scott Adams        *)
*************************************)

-------------------------------------------------------------------
To unsubscribe send a message body containing "unsubscribe"
to linux-eepro100-request@beowulf.org