[3c509] Two 3c509 cards problem

[Proctor, Toby]

Hi all

I have hit a problem while installing a 3c509B and a 3c509Combo onto my RH7, 2.2.16 box.  Both cards are detected and both cards work if the other is disabled.  However if they are both active at the same time i.e. after boot, then only the card which was detected first is useable.  

This is starting to drive me nuts as I've been fighting to get this working for a while now. 

Any help would be much appreciated.

Cheers

Toby
------------------------------------------
ifconfig output:
-------------------------------------------
eth0      Link encap:Ethernet  HWaddr 00:20:AF:26:EB:AD  
          inet addr:193.118.192.87  Bcast:193.118.199.255  Mask:255.255.248.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8489 errors:0 dropped:0 overruns:0 frame:0
          TX packets:413 errors:0 dropped:0 overruns:0 carrier:12
          collisions:0 txqueuelen:100 
          Interrupt:7 Base address:0x300 

eth1      Link encap:Ethernet  HWaddr 00:20:AF:CC:E7:03  
          inet addr:193.118.194.113  Bcast:193.118.199.255  Mask:255.255.248.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9905 errors:0 dropped:0 overruns:0 frame:0
          TX packets:63 errors:0 dropped:0 overruns:0 carrier:39
          collisions:0 txqueuelen:100 
          Interrupt:10 Base address:0x330 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:60 errors:0 dropped:0 overruns:0 frame:0
          TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 


----------------------
Toby Proctor
Roke Manor Research
+44 (0)1794 833226
> The information contained in this e-mail is confidential to Roke Manor and must not be passed to any third party without permission.  This communication is for information only and shall not create or change any contractual relationship
>