[vortex] cannot activate eth0 (3c59x [duh]) in RH8.0 dual boot system

Bogdan Costescu bogdan.costescu@iwr.uni-heidelberg.de
Mon Feb 3 07:16:01 2003


On Sun, 2 Feb 2003, Jordan Weber-Flink wrote:

> (note, this is the complete output, eth0 is not listed)

Then you have a networking configuration problem, that doesn't involve the 
driver.

> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:0c.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd800. Vers LK1.1.18-ac
>  ***INVALID CHECKSUM 0011*** 

This indicates a problem with the EEPROM that keeps the settings on the 
card. Did you use any kind of tool to modify the media type ?

> /etc/sysconfig/netw../ifcfg-eth0:
>  DEVICE=eth1

Well, if ifcfg-eth0 points to eth1, I won't look further :-)

> /etc/modules.conf entry:
> alias eth0 3c59x

This is correct.

-- 
Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: Bogdan.Costescu@IWR.Uni-Heidelberg.De