[vortex] (no subject)

[Boyd Kelly]

Hello,

I am trying to load the 3c59x module for two 3c905CX TXNM cards in a
dachstein LRP (Kernel 2.2.19). The module seems to load ok.

I have the following in my logs. (with debug=6 only options)

Mar 10 22:14:19 kernel: 3c59x.c:v0.99Rb 8/8/2000 Donald Becker,
becker@scyld.com 
Mar 10 22:14:19 kernel: http://www.scyld.com/network/vortex.html 
Mar 10 22:14:19 kernel: eth0: 3Com 3c905C Tornado at 0xec00,
00:04:75:8a:d7:5d, IRQ 11 
Mar 10 22:14:19 kernel: 8K byte-wide RAM 5:3 Rx:Tx split,
autoselect/Autonegotiate interface. 
Mar 10 22:14:19 kernel: MII transceiver found at address 24, status
7809. 
Mar 10 22:14:19 kernel: Enabling bus-master transmits and whole-frame
receives. 
Mar 10 22:14:19 kernel: eth1: 3Com 3c905C Tornado at 0xe880,
00:04:75:8a:d7:11, IRQ 10 
Mar 10 22:14:19 kernel: 8K byte-wide RAM 5:3 Rx:Tx split,
autoselect/Autonegotiate interface. 
Mar 10 22:14:19 kernel: MII transceiver found at address 24, status
7809. 
Mar 10 22:14:19 kernel: Enabling bus-master transmits and whole-frame
receives. 

But I can't ping outside through either interface. I know the LRP
configuration is ok, because I have an identical machine with 3c905b
cards in it and all works fine booting off the same diskette.
I don't really know where to go from here. Thought that I wouldn't have
any probs with 3com cards.

Any help would be appreciated.

Boyd
_______________________________________