[vortex] Re: [3c509] OEM/Ethernet Addr set to 00:00:00:00:00:00?
Andrew A. Chen
achen-scyld@divo.net
Tue Jul 23 16:08:01 2002
On Tue, 23 Jul 2002, Donald Becker wrote:
> On Mon, 22 Jul 2002 achen-scyld@divo.net wrote:
>
> > Subject: [3c509] OEM/Ethernet Addr set to 00:00:00:00:00:00?
>
> Ahhh, a non-spam posting on the 3c509 list. I had to delete 34 other
> messages before I got to this one.
Quite a refreshing feeling, isn't it? :)
> > I'm using a 3c920 card included with an Asus A7M266-DL motherboard.
>
> Alas, it's a message that should have been sent to the vortex mailing
> list.
> Still, I'll answer it here.
>
> > The eeprom onboard (As read with vortex-diag), says that the ethernet MAC is
> > 00:00:00:00:00:00. This is evidently incorrect since the card has a real
> > MAC address, but why isn't it being used? Is this a fault in the driver
> > or in the eeprom? I'm using the driver out of the 2.4.18 kernel:
> >
> > 02:06.0: 3Com PCI 3c905C Tornado at 0xc400. Vers LK1.1.16
>
> Note that the 920 and 905 are the same chip. The number is changed
> depending on the application (PCI card, on-motherboard implementation, etc.)
>
> > Thanks. Please find attached some debugging output:
> >
> > $ sudo ./vortex-diag -ee
> > vortex-diag.c:v2.06 4/18/2002 Donald Becker (becker@scyld.com)
> > http://www.scyld.com/diag/index.html
> > Index #1: Found a 3c905C Tornado 100baseTx adapter at 0xc400.
> > EEPROM format 64x16, configuration table at offset 0:
>
> Normal size and offset for a non-CardBus adapter without modified PCI IDs.
>
> > 00: 00e0 1886 4ce8 9200 ffff ffff ffff 6d51
> > 0x08: 2940 0000 0000 0000 0000 0010 0000 00aa
> > 0x10: 72a2 0000 0000 0180 0000 0000 0000 10b7
> > 0x18: 1000 000a 0000 6300 ffb7 b7b7 0000 0000
> > 0x20: 0000 1234 5670 0000 0000 0000 0000 0000
> > ...
> >
> > The word-wide EEPROM checksum is 0xa78b.
> > Saved EEPROM settings of a 3Com Vortex/Boomerang:
> > 3Com Node Address 00:E0:18:86:4C:E8 (used as a unique ID only).
> > OEM Station address 00:00:00:00:00:00 (used as the ethernet address).
> > Device ID 9200, Manufacturer ID 6d51.
> > Manufacture date (MM/DD/YYYY) 15/31/2027, division , product .
> > No BIOS ROM is present.
> > Options: negotiated duplex, link beat required.
> > Vortex format checksum is incorrect (00f6 vs. 10b7).
> > Cyclone format checksum is incorrect (0x4b vs. 00).
> > Hurricane format checksum is incorrect (0x60 vs. 00).
>
> OK, this interpreted information is correctly reporting the chip EEPROM
> contents. But I can't figure out how you managed to erase the station
> address!
> You didn't use "vortex-diag -H ...", because that wouldn't have left an
> incorrect checksum.
> The EEPROM didn't have some obvious hardware failure, because much of
> the other information is correct. (Although that Manufacture Date and
> other fields are either 0x0000 or 0xffff.)
>
> Before we fix this, how did it happen?
I dunno. "It came that way," as many say... (I pulled it out of the
static bag and plugged it in :)
> How old is the motherboard? Did it work when you got it?
This isn't actually onboard the motherboard. It's a separate PCI adapter
(also manafactured by Asus, however, and has a warning sticker on it
saying "Only use in Asus motherboards"). This motherboard was first
released last september, and I believe the revision I have was updated
less than 2 months ago.
The output as above is as I receieved it. It works fine when talking to
the local subnet, but I suspect my default router (controlled by my isp)
is filtering that MAC address (as it probably assumes it's bogus).
> What OS have you been running?
Linux Slackware 8.1, with a recompiled Linux 2.4.18 kernel.
Thanks.
-a
> The '1234' and '5670' fields in the EEPROM look suspiciously like
> some hand manipulation.
>
> The fix will involve adding a few lines in vortex-diag to replace the
> missing fields.
>
> --
> Donald Becker becker@scyld.com
> Scyld Computing Corporation http://www.scyld.com
> 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
> Annapolis MD 21403 410-990-9993
>