[vortex] Tyan Thunder K7 S2462 Dual 3c59x

[Kirk Bocek]

Maurice, no the second IDE is not disabled. It is in use.

Bogdan, yes I've correctly configured eth1. Here's the relevant part of the
"lspci -v" output:

***********************
00:0f.0 Ethernet controller: 3Com Corporation 3c982 Dual Port Server Cyclone
(rev 78)
        Subsystem: Tyan Computer: Unknown device 2462
        Flags: bus master, medium devsel, latency 80, IRQ 12
        I/O ports at 1c00 [size=128]
        Memory at f4004000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2

00:10.0 Ethernet controller: 3Com Corporation: Unknown device 9807 (rev 78)
        Subsystem: Tyan Computer: Unknown device 6301
        Flags: bus master, medium devsel, latency 64, IRQ 11
        I/O ports at 1c80 [size=128]
        Memory at f4004400 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
***********************

The first device (ID 9805) installs just fine. The second (ID 9807) refuses
to be recognized.

I've tried the 3Com 3c90x driver (version 1.02). It behaves the same way as
the 3c59x.

Thanks,
Kirk Bocek