[vortex] problem with 3c905C-TX on debian with kernel 2.4.17

[Donald Becker]

On Thu, 21 Feb 2002, Felix Stolle wrote:

> i'm using the compiled module from the 2.4.17 kernel.
> when i load with no options everything works just fine (except its just 10 
> Mbit Half-Duplex)

What is the driver detection message?

> when i try to force the card in 100 Mbit and/or Full-Duplex with 
> options=0x204 and debug=9 i get the following msgs:

From
 http://www.scyld.com/network/vortex.html
 
Index  Media
  4   100baseTx Symbol mode, valid for 3c595 only. 

You should be using options=0x208

Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993