[vortex] Problems with 3CXFE575BT and IBM iSeries Thinkpad
Patrick Leonard
pleonard@mindspring.com
Mon Feb 18 22:30:01 2002
I have been having problems getting a 3Com 3CXFE575BT
10/100 PCMCIA card to work in an IBM 1500 iSeries
Thinkpad. I am including the output from dmesg.
Please let me know any additional information that I
can provide.
Thanks,
Patrick Leonard
Linux version 2.4.7-10
(bhcompile@stripples.devel.redhat.com) (gcc version
2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep
6 17:27:27 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000
(usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI
data)
BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI
NVS)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=307
BOOT_FILE=/boot/vmlinuz-2.4.7-10
Initializing CPU#0
Detected 365.820 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 729.08 BogoMIPS
Memory: 125204k/131008k available (1269k kernel code,
4520k reserved, 90k data, 220k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5,
131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536
bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 32768 (order: 6, 262144
bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000
00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000
00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000
00000000 00000000
CPU: Common caps: 0183f9ff 00000000
00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last
bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x0f (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 83101kB/27700kB, 256
slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size
1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes;
override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x78c0-0x78c7, BIOS settings:
hda:DMA, hdb:pio
ide1: BM-DMA at 0x78c8-0x78cf, BIOS settings:
hdc:DMA, hdd:pio
hda: IBM-DBCA-204860, ATA DISK drive
ide: Assuming 33MHz PCI bus speed for PIO modes;
override with idebus=xx
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 9514260 sectors (4871 MB) w/420KiB Cache,
CHS=592/255/63, (U)DMA
ide-floppy driver 0.97
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind
8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 320k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 220k freed
Adding Swap: 184708k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: No IRQ known for interrupt pin A of device
00:14.0. Please try using pci=biosirq.
usb-ohci.c: found OHCI device with no IRQ assigned.
check BIOS settings!
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,7), internal
journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,6), internal
journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: No IRQ known for interrupt pin A of device
00:14.0. Please try using pci=biosirq.
usb-ohci.c: found OHCI device with no IRQ assigned.
check BIOS settings!
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (1023 buckets, 8184 max)
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Guessed IRQ 9 for device 00:13.0
PCI: Sharing IRQ 9 with 00:13.1
PCI: Guessed IRQ 9 for device 00:13.1
PCI: Sharing IRQ 9 with 00:13.0
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000007
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000821
cs: cb_alloc(bus 6): vendor 0x10b7, device 0x5157
PCI: Failed to allocate resource 0(1000-fff) for
06:00.0
PCI: Enabling device 06:00.0 (0000 -> 0003)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df
0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
06:00.0: 3Com PCI 3CCFE575BT Cyclone CardBus at
0x1000. Vers LK1.1.16
PCI: Setting latency timer of device 06:00.0 to 64
eth0: command 0x5800 did not complete! Status=0xffff
eth0: command 0x2804 did not complete! Status=0xffff
eth0: command 0x3002 did not complete! Status=0xffff
eth0: command 0x3002 did not complete! Status=0xffff
eth0: command 0x3002 did not complete! Status=0xffff
eth0: command 0x3002 did not complete! Status=0xffff
solo1: version v0.19 time 17:36:51 Sep 6 2001
PCI: Guessed IRQ 5 for device 00:08.0
solo1: joystick port at 0x78a5
solo1: ddma base address: 0x7870
cs: cb_free(bus 6)
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com