[vortex] problems w/3c59x on 3CCFE575BT

[dean gaudet]

On Sun, 22 Dec 2002, Donald Becker wrote:

> Try running 'vortex-diag -ee -aa -m'

# vortex-diag -ee -aa -m
vortex-diag.c:v2.05 5/15/2001 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a 3CCFE575BT CardBus adapter at 0x4800.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 4, registers values by window:
  Window 0: 0000 0000 0000 0000 0000 066f 7261 0000.
  Window 1: FIFO FIFO 0000 0000 0000 0000 0000 2000.
  Window 2: 5000 b404 29e7 0000 0000 0000 0112 4000.
  Window 3: 0000 0160 05ea 0020 0040 1000 0800 6000.
  Window 4: 0000 0000 0000 0cc2 0003 a800 6200 8000.
  Window 5: 1ffc 0000 0000 0600 0807 06de 06c6 a000.
  Window 6: 0000 0000 0000 0001 2100 4a70 0e68 c000.
  Window 7: 0000 0000 0000 0000 0000 0000 0002 e000.
Vortex chip registers at 0x4800
  0x4810: **FIFO** 00000000 00000001 *STATUS*
  0x4820: 00000020 09019210 00080000 00001404
  0x4830: 00000000 aec85138 09019070 00080004
 Indication enable is 06c6, interrupt enable is 06de.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  MII.
Transceiver type in use:  MII.
 MAC settings: full-duplex.
 Station address set to 00:50:04:b4:e7:29.
 Configuration options 0112.
EEPROM contents (256 words, offset 0x30):
 0x000: 10b7 5157 0007 0000 0001 0200 4000 0000
 0x008: 0000 0000 0000 0000 0000 0000 0000 0000
 0x010: 0000 0000 0000 0000 0090 0000 10b7 5b57
 0x018: 0000 0000 0000 0000 0000 0000 0109 0a0a
 0x020: 0000 0060 0000 0000 0000 0000 0000 0000
 0x028: 0000 0000 0000 0000 0000 0000 0000 0000
 0x030: 0050 04b4 e729 5157 c6fc 0036 4757 6d50
 0x038: 3000 0009 0050 04b4 e729 2010 0000 0006
 0x040: 32a6 1570 0000 0060 0007 0000 0000 00be
 0x048: 0313 4943 2053 0104 5701 0451 0306 0001
 0x050: 0000 0500 410c 019a 1eb5 5501 3002 ffff
 0x058: 0701 1106 4000 0000 1500 0534 3300 6f43
 0x060: 206d 6f43 7072 726f 7461 6f69 006e 4333
 0x068: 4643 3545 3537 5442 4c00 4e41 4320 7261
 0x070: 6264 7375 4320 7261 0064 3030 0031 21ff
 0x078: 0602 0501 0006 8080 8080 ff19 ffff ffff
 0x080: ffff ffff ffff ffff ffff ffff ffff ffff
 0x088: ffff ffff ffff ffff ffff ffff ffff ffff
 0x090: ffff ffff ffff ffff ffff ffff ffff ffff
 0x098: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0a0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0a8: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0b0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0b8: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0c0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0c8: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0d0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0d8: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0e0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0e8: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0f0: ffff ffff ffff ffff ffff ffff ffff ffff
 0x0f8: ffff ffff ffff ffff ffff ffff ffff ffff
 The word-wide EEPROM checksum is 0xfe69.
Saved EEPROM settings of a 3Com Vortex/Boomerang:
 The CardBus product ID is 10b7 5157.
 3Com Node Address 00:50:04:B4:E7:29 (used as a unique ID only).
 OEM Station address 00:50:04:B4:E7:29 (used as the ethernet address).
 Manufacture date (MM/DD/YYYY) 7/28/1999, division 6, product WG.
 Options: negotiated duplex, link beat required.
  Vortex format checksum is correct (00be vs. 00be).
  Cyclone format checksum is incorrect (0x1a vs. 00).
  Hurricane format checksum is incorrect (0x6b vs. 00).
 MII PHY found at address 0, status 280d.
 MII PHY 0 at #0 transceiver registers:
   2000 280d 0300 e54b 0001 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0000 0000
   0140 0005 1600 0000 0000 0000 0000 0000
   0000 0000 0000 0000 0000 0000 0000 0000.