[vortex] 3c59x message

[Metod Kozelj]

Hello,

just noticed following line in my messages.log:

eth0: command 0x3002 took 18530 usecs! Please tell andrewm@uow.edu.au


This is on AlphaPC 164SX, kernel 2.4.2, 3c59x.c driver loaded as module,
booted from SRM using aboot 0.7.

Init time output:

3c59x.c:LK1.1.12 06 Jan 2000  Donald Becker and others. http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $ 
See Documentation/networking/vortex.txt
eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0x8400,  00:50:04:66:df:0b, IRQ 24 
  product code 'TN' rev 00.9 date 02-10-99 
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. 
  MII transceiver found at address 24, status 782d. 
  Enabling bus-master transmits and whole-frame receives. 
eth0: using NWAY autonegotiation

Remote end is a plain 10Mbps hub.

This happened while/right after extensive NFS traffic. Operation resumes
normally (in fact I didn't notice anything weird).

Regards,
  Metod

Metod Kozelj

mailto:Metod.Kozelj@rzs-hm.si            /\  Ne posiljajte mi smeti ker grizem!
http://www.rzs-hm.si/                   /  \  Don't spam me for I bite!
_______________________________________/    \__________________________________

---- perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'