[vortex] need assistance with network problems....

[Lorris J. Woods]

Hey, you should also issue "lsmod" cmd to be sure the mod is loaded.
and check your parameters in /etc/sysconfig/netwproks-script/ifcfg-eth0.

On Mon, 28 Aug 2000, Bogdan Costescu wrote:

> 
> On Sat, 26 Aug 2000, David Pitts wrote:
> 
> > I then run /etc/rc.d/init.d/network restart
> > and it says that eth0 as well as lo has come up.
> > I run /etc/rc.d/init.d/network/status
> > and it says that eth0 and lo are both configured devices
> > I run the route command and all I get is lo information
> > I try to do a route add ...
> > and it tells me that the network is down.
> 
> Can you send us the logs (from /var/log/messages) from when you tried with
> the 3c59x driver ?
> If the network driver could not be initialized properly, it should be
> possible to see it there.
> 
> Sincerely,
> 
> Bogdan Costescu
> 
> IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
> Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
> Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
> E-mail: Bogdan.Costescu@IWR.Uni-Heidelberg.De
> 
> 
> _______________________________________________
> vortex mailing list
> vortex@scyld.com
> http://www.scyld.com/mailman/listinfo/vortex
> 

Regards,

Lorris J. Woods