3c905b problems
Vikram Rayabhari
vikram@asterix.cis.ohio-state.edu
Mon Feb 22 12:50:42 1999
Hi,
I have a linux box at my office with a 3c905b card. I am not able to
access any machines outside the subnet. Ping to the default gateway and
other machines in my subnet works fine. Ping to any machine outside the
subnet just bombs.
There is no problem when I boot NT.
Could someone please help me out ?? I am new to linux.
Thanks
Vikram
Description :
Pentium II processor
256 MB RAM
Red hat linux 5.1 with 2.0.34 kernel
3c59x.c ver0.99H dated 11/17/98
#ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:180 errors:0 dropped:0 overruns:0
TX packets:180 errors:0 dropped:0 overruns:0
eth0 Link encap:Ethernet HWaddr 00:10:5A:98:46:0D
inet addr:164.107.60.132 Bcast:164.107.255.255
Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:941 errors:0 dropped:0 overruns:0
TX packets:1041 errors:0 dropped:0 overruns:0
Interrupt:10 Base address:0x1400
Default Gateway 164.107.60.1
Default gateway device eth0
#vortex-diag -aa
vortex-diag.c:v1.05 5/22/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Found a 3Com PCI Ethernet 3c905b rev 0 at 0x1400.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 7, registers values by window:
Window 0: 0000 0000 0000 0000 5555 00bf 0000 0000.
Window 1: FIFO FIFO 0000 0000 0000 0000 0000 2000.
Window 2: 1000 985a 0d46 0000 0000 0000 000a 4000.
Window 3: 0000 0180 05ea 0000 000a 0800 0800 6000.
Window 4: 0000 0000 0000 0cd8 0003 88c8 0000 8000.
Window 5: 1ffc 0000 0000 0600 0807 06de 06c6 a000.
Window 6: 0000 0000 0000 1700 2000 11ce 0168 c000.
Window 7: 0000 0000 0000 0000 0000 0000 0002 e000.
Vortex chip registers at 0x1400
0x1410: **FIFO** **FIFO** 0000000d 00000000
0x1420: 00000020 00000000 00080000 00000004
0x1430: 00000000 b6407b64 0382d970 00080004
No interrupt sources are pending.
Transceiver/media interfaces available: 100baseTx 10baseT.
MAC settings: half-duplex.
#./vortex-diag -e
vortex-diag.c:v1.05 5/22/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Found a 3Com PCI Ethernet 3c905b rev 0 at 0x1400.
EEPROM contents:
0010 5a98 460d 9055 c534 0036 5a51 6d50
2979 0000 0010 5a98 460d 0010 0000 002a
32a2 0000 0000 0180 0000 0004 0000 10b7
9055 000a 0000 0000 0000 0000 0000 0000
0023 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
The word-wide EEPROM checksum is 0x5ddc.
Parsing the EEPROM of a 3Com Vortex/Boomerang:
3Com Node Address 00:10:5A:98:46:0D (used as a unique ID only).
OEM Station address 00:10:5A:98:46:0D (used as the ethernet address).
Manufacture date (MM/DD/YY) 9/20/98, division 6, product QZ.
Options: .
Vortex checksum is 4b (vs. 10b7),Cyclone checksum is 23 (vs. 23).
#./vortex-diag -m
vortex-diag.c:v1.05 5/22/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Found a 3Com PCI Ethernet 3c905b rev 0 at 0x1400.
MII PHY found at address 0, status 786d.
MII PHY found at address 1, status 786d.
MII PHY found at address 2, status 786d.
MII PHY found at address 3, status 786d.
MII PHY 0 at #0 transceiver registers:
3000 786d 0000 0000 01e1 0020 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000
0000 0008 0810 0000 0000 0005 2001 0000
0000 2040 07cf 1c11 0011 1000 0000 0000.
MII PHY 1 at #1 transceiver registers:
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY 2 at #2 transceiver registers:
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY 3 at #3 transceiver registers:
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000