3c59x.c v0.99F doesn't work with 3c905 cards?

[Ted_Rule@flextech.co.uk]

--0__=QyfY1JSaaWS7F1to9Yp5Wnu3hmWUw79HSRXClcdgT5BVEbOawMqc5bNf
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline



Could more specifically state whether the driver works in either or any of

100M Full Duplex ?
100M Half Duplex ?

as I've seen oddities with 3c905B even on NT4 latest driver. This seemed to
be dependent on duplex settings....

Also whether you've tried forcing the link speed via conf.modules or simply
let it autonegotiate up to the hub speed?


Thanks.

Ted Rule

Flextech Television





Juergen Vigna <jug@sad.it> on 31/08/98 08:19:09

To:   linux-vortex-bug@cesdis1.gsfc.nasa.gov
cc:    (bcc: Ted Rule/160GPS/Flextech/UK)

Subject:  RE: 3c59x.c v0.99F doesn't work with 3c905 cards?





On 29-Aug-98 tl wrote:
> It looks like the 0.99F version of 3c59x.c doesn't work with at least
> my 3c905 card (non-B model). Linus have included that version in Linux
> 2.1.120-pre1, which makes this potential silent breakage much more
> important. If other 3c905 cards are affected then someone should tell
> Linus so that he can make sure 0.99F isn't in the final version.
>

The problem is that I've a 3c905B and this model doesn't work in 100Mbit
mode with the 0.99E driver on kernel version 2.0.35.

Greets J
--0__=QyfY1JSaaWS7F1to9Yp5Wnu3hmWUw79HSRXClcdgT5BVEbOawMqc5bNf
Content-type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-transfer-encoding: quoted-printable


=FCrgen

-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._

Dr. Juergen Vigna                     E-Mail: jug@sad.it
Gerbergasse 60                        Tel:    +39-471-450260
I-39100 Bozen                         Fax:    +39-471-970042
ITALY

We really don't have any enemies.  It's just that some of our best
friends are trying to kill us.

-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._-._


=

--0__=QyfY1JSaaWS7F1to9Yp5Wnu3hmWUw79HSRXClcdgT5BVEbOawMqc5bNf--