Very high latency....
Anirudh Modi
anirudh@bart.ihpca.psu.edu
Wed Nov 18 14:55:16 1998
Hi,
I have recently set up a 25 node dual PII-400 cluster for our
research group here in our University. I am having a few problems with my
MPI codes. After testing some MPI codes, I found out that my network
latency was too high (4.5 ms) for message sizes under 128 bytes, although
I am getting transfer rates upto 11.24 MB/sec for large message sizes
between every nodes (I am running at 100 Mb w/Full duplex on)! I am using
v0.99G of the 3c59x driver and have a 3com 3c905B Cyclone card on every
node. Could this be a possible driver problem ? Please help. I am running
RedHat 5.1 with 2.0.35 #10 kernel (the newer 2.1.128 and 2.0.36 kernels
refuse to detect both my ethernet cards on the server properly and hence
I have been unable to use them).
Also, I am having problems with 2 ethernet cards (both of them 3c905B
Cyclone) on my server with 0.99G driver, so I had to resort to the older
0.99E driver which works fine. The 0.99G driver wasn't autodetecting both
cards at full duplex and I do not know how to force it (as I am using all
these drivers built into the kernel and not as modules). Any help will
be highly appreciated. Thanx in advance.
_______________________________________________________
| |
| A N I R U D H M O D I |
| (currently doing M.S. in Aerospace Engg.) |
| Pennsylvania State University (PSU) |
| Phone : +1-814-865-1965 (Off) |
| : +1-814-862-8647 (Res) |
| : +1-814-862-9087 (Res) |
/) FAX : +1-814-865-7092 (Off) (\
/ ) E-mail : anirudh-modi@psu.edu ( \
_( (| Personal Page : http://bart.aero.psu.edu |) )_
(((\ \_______________________________________________________/ /)))
(\\\\ \_/ / \ \_/ ////)
\ / \ /
\ _/ \_ /
/ / \ \