3C905 not detected
Tim Page
trp@wescor.com
Fri Jul 31 15:31:04 1998
I have almost reached the end of my rope with this card. I am running on a
pentium 66. Linux version 2.0.34, 3c59x version .99E
I have tried both with the driver compiled into the kernel, and as a module
and the card is not detected. Here is the output from the
vortex-diag program: I found it interesting that it seems to detect the card
twice. Is this normal? Any help will be greatly appreciated.
Thanks,
Tim Page
Wescor, Inc.
vortex-diag.c:v1.05 5/22/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
Found a 3Com PCI Ethernet 3c905 rev 0 at 0x4000.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 0, registers values by window:
Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
Window 1: FIFO FIFO 0000 2000 8000 00ff 13fc 2000.
Window 2: 0000 0000 0000 0000 0000 0000 0000 4000.
Window 3: 02d8 0163 0000 0000 e040 0bff 13ff 6000.
Window 4: 0000 06d0 2000 0000 0002 8802 0000 8000.
Window 5: 1ffc fffc 0000 1ffc 0000 0000 0000 a000.
Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
Window 7: 0000 0000 0000 0000 8000 00ff 0000 e000.
Vortex chip registers at 0x4000
0x4010: **FIFO** **FIFO** 00008000 000013fc
0x4020: 00000000 00000000 00000000 ff000000
0x4030: 00000000 0000dce4 00000000 00000000
No interrupt sources are pending.
Transceiver/media interfaces available: MII.
MAC settings: half-duplex.
Found a 3Com PCI Ethernet 3c905 rev 0 at 0x4000.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 0, registers values by window:
Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
Window 1: FIFO FIFO 0000 2000 8000 00ff 13fc 2000.
Window 2: 0000 0000 0000 0000 0000 0000 0000 4000.
Window 3: 02d8 0163 0000 0000 e040 0bff 13ff 6000.
Window 4: 0000 06d0 2000 0000 0002 8802 0000 8000.
Window 5: 1ffc fffc 0000 1ffc 0000 0000 0000 a000.
Window 6: 0000 0000 0000 0000 0000 0000 0000 c000.
Window 7: 0000 0000 0000 0000 8000 00ff 0000 e000.
Vortex chip registers at 0x4000
0x4010: **FIFO** **FIFO** 00008000 000013fc
0x4020: 00000000 00000000 00000000 ff000000
0x4030: 00000000 0000f023 00000000 00000000
No interrupt sources are pending.
Transceiver/media interfaces available: MII.
MAC settings: half-duplex.