3c574TX: Too much work in interrupt

[Donald Becker]

On Sun, 2 Aug 1998, Paul LeMahieu wrote:

> I tried fiddling with the max_interrupt_work parameter in the 3c574_cs.c
> code, reducing it from 10 to 5 to 2.  In fact, the log results
> above are from a module where I had set max_interrupt_work = 2.

You should set the value *higher*.  If you aren't concerned about real-time
performance for other devices, set it to 20 or 50.

Donald Becker					  becker@cesdis.gsfc.nasa.gov
USRA-CESDIS, Center of Excellence in Space Data and Information Sciences.
Code 930.5, Goddard Space Flight Center,  Greenbelt, MD.  20771
301-286-0882	     http://cesdis.gsfc.nasa.gov/people/becker/whoiam.html