[tulip] FPC-0106TX Problem with Tulip

[Dirk Drescher]

Hi,
I'm using a CardBus-Card named FPC-0106TX from Level1 (printed on box). 
The card is recognized by card manager (2 beeps).
# cardctl ident
Socket 0:
product info: "CardBus", "Fast Ethernet", "V1.0", ""
manfid: 0x13d1, 0xab02
function: 6 (network)
PCI id: 0x13d1, 0xab08

# tulip-diag -ee -mm
tulip-diag.c:v2.15 9/23/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a ADMtek AL985 Centaur (OEM CardBus) adapter at 0x200.
 Comet duplex is reported in the MII status registers.
 Transmit started, Receive started.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  Comet MAC address registers 9d98e000 ffffe5c9
  Comet multicast filter 0000000000000000.
EEPROM 256 words, 8 address bits.
  Ethernet MAC Station Address 00:e0:98:9d:c9:e5.
  Default connection type 'Autosense'.
  PCI IDs Vendor 13d1 Device ab08  Subsystem 13d1 ab08
  PCI min_grant 255 max_latency 255.
  CSR18 power-up setting 0x80cc****.
EEPROM contents (256 words):
0x00:  0985 0002 0000 0000 e000 9d98 e5c9 0000
0x08:  0000 0400 0000 0000 0000 0000 0000 0100
0x10:  ab08 13d1 ab08 13d1 ffff 0202 0000 80cc
0x18:  0000 0000 0000 0000 0000 0000 0000 0000
0x20:  0000 0000 0000 0000 0000 0000 0000 0000
0x28:  0040 0060 0000 0000 0000 0000 0000 0000
0x30:  0000 0000 0000 0000 0000 0000 0000 0000
0x38:  0000 0000 0000 0000 0000 0000 0000 360f
0x40:  ffff ffff ffff ffff ffff ffff ffff ffff
0x48:  ffff ffff ffff ffff ffff ffff ffff ffff
0x50:  ffff ffff ffff ffff ffff ffff ffff ffff
0x58:  ffff ffff ffff ffff ffff ffff ffff ffff
0x60:  ffff ffff ffff ffff ffff ffff ffff ffff
0x68:  ffff ffff ffff ffff ffff ffff ffff ffff
0x70:  ffff ffff ffff ffff ffff ffff ffff ffff
0x78:  ffff ffff ffff ffff ffff ffff ffff ffff
0x80:  ffff ffff ffff ffff ffff ffff ffff ffff
0x88:  ffff ffff ffff ffff ffff ffff ffff ffff
0x90:  ffff ffff ffff ffff ffff ffff ffff ffff
0x98:  ffff ffff ffff ffff ffff ffff ffff ffff
0xa0:  0313 4943 2053 d104 0213 21ab 0602 2201
0xa8:  0102 2202 0205 9680 0098 0522 0002 f5e1
0xb0:  2205 0302 1501 0520 4300 7261 4264 7375
0xb8:  4600 7361 2074 7445 6568 6e72 7465 5600
0xc0:  2e31 0030 ff00 0400 0306 2a01 0000 0700
0xc8:  1106 0000 0001 0700 0206 0000 0001 0700
0xd0:  0706 0000 0002 0500 410a 0139 1eb5 b002
0xd8:  fefc ff84 ff84 ffff ffff ffff ffff ffff
0xe0:  ffff ffff ffff ffff ffff ffff ffff ffff
0xe8:  ffff ffff ffff ffff ffff ffff ffff ffff
0xf0:  ffff ffff ffff ffff ffff ffff ffff ffff
0xf8:  ffff ffff ffff ffff ffff ffff ffff 00b6
 ID block CRC 0x81 (vs. 00).
  Full contents CRC 0x360f (read as 0x360f).
 MII PHY found at address 1, status 0x786d.
 MII PHY found at address 2, status 0x786d.
 MII PHY found at address 3, status 0x786d.
 MII PHY found at address 4, status 0x786d.
 MII PHY #1 transceiver registers:
   3100 786d 001d 2411 01e1 41e1 0007 2001
   0000 0000 0000 0000 0000 0000 0000 0000
   1001 0000 2069 0621 0000 000f 7490 0f0c
   be8f 6517 325d 162b 9a13 0444 0230 0000.
 Basic mode control register 0x3100: Auto-negotiation enabled.
 Basic mode status register 0x786d ... 786d.
   Link status: established.
   Capable of  100baseTx-FD 100baseTx 10baseT-FD 10baseT.
   Able to perform Auto-negotiation, negotiation complete.
 Vendor ID is 00:07:49:--:--:--, model 1 rev. 1.
   No specific information is known about this transceiver type.
 I'm advertising 01e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT
   Advertising no additional info pages.
   IEEE 802.3 CSMA/CD protocol.
 Link partner capability is 41e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
   Negotiation  completed.

I can ping myself, but if i ping to other host, the result is: Destination 
Host Unreachable.
I cant change the card mode.
Can anyone help me?

If i change the card (with 3Com-Card) this card works perfectly :-(

Dirk