[tulip] Re: Conexant LANfinity COMBO doenst send anything
Adriano Carvalho
ch0wn@myself.com
Sat Jan 4 15:22:01 2003
Donald Becker wrote :
>What does 'tulip-diag' report after it stops?
>What are the error messages from the driver?
Tulip-dialog :
tulip-diag.c:v2.16 12/17/2002 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Conexant LANfinity adapter at 0x1800.
Port selection is MII, half-duplex.
Transmit started, Receive started.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit threshold is 128.
With option -e :
tulip-diag.c:v2.16 12/17/2002 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Conexant LANfinity adapter at 0x1800.
Port selection is MII, half-duplex.
Transmit started, Receive started.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit threshold is 128.
EEPROM 256 words, 8 address bits.
Conexant EEPROM format is undocumented.
Now (18:13 in Brazil) my ethernet card isnt send anything, its stopped.
eth0 Link encap:Ethernet HWaddr 00:90:96:02:E4:57
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:12 dropped:0 overruns:0 carrier:26
>The station address has been read correctly, unlike >the 0.9.* driver.
> You seem to have passed a module option that sets >the transceiver to
> advertise only 10baseT. Was that intentional?
No, its not. Sorry, But my webmail is a shit. Theres a bug here, so , everything that I put here is "mixtured". I'll send later other mail by hotmail (eca).=)
>Does the link
> collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0xe000
So, I type ifconfig eth0 and this is :
--
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
Meet Singles
http://corp.mail.com/lavalife