[tulip] Tulip and PowerPC endian issue?

[Jim Rowe]

On Fri, 2003-01-31 at 16:31, Donald Becker wrote:
> Hmmm, we are still not seeing the status messages.  There should be
> messages for every interrupt and received packet.
> 
> Are you getting a non-zero interrupt count in /proc/interrupts?

I'm not getting any interrupts. The CardBus PC card is eth1, interrupt
30:

root@eth0:~# cat /proc/interrupts 
           CPU0       
  0:       2268  IBM UIC Edge      serial
  2:          0  IBM UIC Edge      IBM OCP IIC
  9:          0  IBM UIC Edge      405eth Wakeup
 10:          0  IBM UIC Edge      405eth MAL SERR
 11:       5191  IBM UIC Edge      405eth TX EOB
 12:       8135  IBM UIC Edge      405eth RX EOB
 13:          0  IBM UIC Edge      405eth TX DE
 14:          0  IBM UIC Edge      405eth RX DE
 15:         15  IBM UIC Edge      405eth MAC
 30:          0  IBM UIC Edge      Ricoh Co Ltd RL5c476 II, Ricoh Co Ltd
RL5c476 II (#2), eth1
BAD:          0


I also checked out /proc/sys/net and it looks like its dropping packets:

Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:    8748      88    0    0    0     0          0         0     8748      88    0    0    0     0       0          0
  eth0: 5317308    8676   29   16    0    47          0         0   907160    5432    2    0    0     0       2          0
  eth1:       0       0    0  304    0     0          0         0        0       0    0    0    0     0       0          0


-- 
Jim Rowe
Advanced CounterMeasure Systems
Email: jrowe@acmsystems.com