[tulip] D-Link DFE-680TXD: "The transmitter stopped"

[Leif Nixon]

Donald Becker <becker@scyld.com> writes:

> Did you use an unmodified tulip driver?

Yep, pulled it from ftp.scyld.com.

> > > What is the CardBus ID and the PCI ID?
> > >   CardBus ID: cardctl or read the lines in 'dmesg'.
> >   Socket 1:
> >     product info: "D-Link", "DFE-680TXD", "V1.0", ""
> >     manfid: 0x13d1, 0xab02
> 
> This is in the driver.  It maps to an Abocom design with a ADMtek
> Centaur-C/Comet chip.

Ah. Cardmgr fooled me, then. I'll switch to using "-t 15".

> The card loads its PCI ID from the configuration EEPROM.
> There is nothing hard-wired that identifies the chip.

OK, you learn something new every day.

> Pass "-eee" to the see the text in the CIS table.

Right, here goes:

tulip-diag.c:v2.15 9/23/2002 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Assuming a ADMtek AL985 Centaur-C adapter at 0x1200.
 Comet duplex is reported in the MII status registers.
 Transmit stopped, Receive stopped.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Stopped'.
  The transmit threshold is 128.
 Interrupt sources are pending!  CSR5 is fc06c812.
   Tx complete indication.
   Link passed indication.
   Timer expired indication.
   Early Rx indication.
  Comet MAC address registers 82ba5000 ffff63e6
  Comet multicast filter 0000000000000000.
EEPROM 256 words, 8 address bits.
  Ethernet MAC Station Address 00:50:ba:82:e6:63.
  Default connection type 'Autosense'.
  PCI IDs Vendor 1186 Device 1541  Subsystem 1186 1541
  PCI min_grant 255 max_latency 255.
  CSR18 power-up setting 0x80cc****.
EEPROM contents (256 words):
0x00:  0985 0002 0000 0000 5000 82ba 63e6 0000  _________P___c__
0x08:  0000 0400 0000 0000 0000 0000 0000 0100  ________________
0x10:  1541 1186 1541 1186 ffff 0202 0000 80cc  A___A___________
0x18:  0000 0000 0000 0000 0000 0000 0000 0000  ________________
0x20:  0000 0000 0000 0000 0000 0000 0000 0000  ________________
0x28:  0040 0060 0000 0000 0000 0000 0000 0000  @_`_____________
0x30:  0000 0000 0000 0000 0000 0000 0000 0000  ________________
0x38:  0000 0000 0000 0000 0000 0000 0000 9389  ________________
0x40:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x48:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x50:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x58:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x60:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x68:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x70:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x78:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x80:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x88:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x90:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0x98:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0xa0:  0313 4943 2053 d104 0213 21ab 0602 2201  __CIS _____!___"
0xa8:  0102 2202 0205 9680 0098 0522 0002 f5e1  ___"______"_____
0xb0:  2205 0302 1501 051c 4400 4c2d 6e69 006b  _"_______D-Link_
0xb8:  4644 2d45 3836 5430 4458 5600 2e31 0030  DFE-680TXD_V1.0_
0xc0:  ff00 0400 0306 2a01 0000 0700 1106 0000  _______*________
0xc8:  0001 0700 0206 0000 0001 0700 0706 0000  ________________
0xd0:  0002 0500 410a 0139 1eb5 b002 fefc ff84  _____A9_________
0xd8:  ff84 ff84 ff84 ffff ffff ffff ffff ffff  ________________
0xe0:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0xe8:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0xf0:  ffff ffff ffff ffff ffff ffff ffff ffff  ________________
0xf8:  ffff ffff ffff ffff ffff ffff ffff 00aa  ________________
 ID block CRC 0xbe (vs. 00).
  Full contents CRC 0x9389 (read as 0x9389).