[tulip] Hawking CardBus PN672TX 10/100

[FlashFyre_2000]

Hello,

According to the (out-of-date) Hawking Technologies site, this card 
should work with the tulip driver.

After downloading the netdrivers-3.1-1.src.rpm from scyld.com and 
running the instructions on/in :

http://www.scyld.com/network/updates.html
(both the src RPM and and the CardBus details)

I now get:

[root@wombat tulip_drivers]# depmod -a
depmod: *** Unresolved symbols in /lib/modules/2.4.9-21/net/cb_shim.o
depmod: *** Unresolved symbols in /lib/modules/2.4.9-21/net/myson803.o

Plugging the card in gives me a high beep then a low beep with the 
following in /var/log/messages:

Mar 11 11:49:17 wombat cardmgr[2196]: initializing socket 1
Mar 11 11:49:17 wombat cardmgr[2196]: socket 1: Linksys EtherFast PCM200 v2
Mar 11 11:49:17 wombat kernel: cs: cb_alloc(bus 6): vendor 0x17b3, 
device 0xab08
Mar 11 11:49:17 wombat kernel: PCI: Enabling device 06:00.0 (0000 -> 0003)
Mar 11 11:49:17 wombat cardmgr[2196]: executing: 'modprobe cb_enabler'
Mar 11 11:49:18 wombat cardmgr[2196]: executing: 'modprobe pci-scan'
Mar 11 11:49:18 wombat cardmgr[2196]: executing: 'modprobe cb_shim'
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol 
pcibios_read_config_byte
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol kmalloc
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol 
pcibios_read_config_dword
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol __ioremap
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol kfree
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol unregister_driver
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol pci_find_slot
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol register_driver
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol 
pcibios_read_config_word
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: unresolved symbol printk
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: Note: modules without a GPL 
compatible license cannot use GPLONLY_ symbols
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: insmod 
/lib/modules/2.4.9-21/net/cb_shim.o failed
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/cb_shim.o: insmod cb_shim failed
Mar 11 11:49:18 wombat cardmgr[2196]: modprobe exited with status 255
Mar 11 11:49:18 wombat cardmgr[2196]: module 
/lib/modules/2.4.9-21/pcmcia/cb_shim.o not available
Mar 11 11:49:18 wombat cardmgr[2196]: executing: 'modprobe tulip'
Mar 11 11:49:18 wombat /etc/hotplug/pci.agent: ... no drivers for PCI slot
Mar 11 11:49:18 wombat kernel: Linux Tulip driver version 0.9.15-pre6 
(July 2, 2001)
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/kernel/drivers/net/tulip/tulip.o: init_module: No 
such device
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/kernel/drivers/net/tulip/tulip.o: insmod 
/lib/modules/2.4.9-21/kernel/drivers/net/tulip/tulip.o failed
Mar 11 11:49:18 wombat cardmgr[2196]: + Hint: insmod errors can be 
caused by incorrect module parameters, including invalid IO or IRQ 
parameters
Mar 11 11:49:18 wombat kernel: tulip.c:v0.94 1/28/2002  Written by 
Donald Becker <becker@scyld.com>
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/tulip.o: init_module: No such device
Mar 11 11:49:18 wombat kernel:   http://www.scyld.com/network/tulip.html
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/tulip.o: insmod 
/lib/modules/2.4.9-21/net/tulip.o failed
Mar 11 11:49:18 wombat cardmgr[2196]: + 
/lib/modules/2.4.9-21/net/tulip.o: insmod tulip failed
Mar 11 11:49:18 wombat cardmgr[2196]: + Hint: insmod errors can be 
caused by incorrect module parameters, including invalid IO or IRQ 
parameters
Mar 11 11:49:18 wombat cardmgr[2196]: modprobe exited with status 255
Mar 11 11:49:18 wombat cardmgr[2196]: module 
/lib/modules/2.4.9-21/pcmcia/tulip.o not available
Mar 11 11:49:20 wombat cardmgr[2196]: get dev info on socket 1 failed: 
Resource temporarily unavailable

This is a RedHat 7.2 system which is up2date as of last week. The card 
has 6 leds on it (power,wake,full,10,100,act) and I get (Power,Full,10) 
on my 10baset net.

TIA for any ideas on how to get the cb_shim symbols resolved.

---
John