[tulip] 21143 Quad Blues
VIZADINI@lanier-europe.com
VIZADINI@lanier-europe.com
Mon Jun 3 10:47:01 2002
This is a multipart message in MIME format.
--=_alternative 0027A1DCC1256BCD_=
Content-Type: text/plain; charset="us-ascii"
Hi, thanks for the responses (and apologies for the delay, i was out of
the country)
In response to the 2 questions/suggestions:
1] i have tried using de4x5 (the one included with the 2.4.14 kernel, as
the netdrivers
i downloaded from scyld.com didn't have a de4x5 module)
The story is as follows: If i insmod -either- de4x5.o or tulip.o then i
only get 1 interface
(out of the 4), ie., only eth0; -however- if i insmod -both- de4x5.o and
tulip.o, then i get eth0 and eth1.
in fact, my dmesg reads as follows:
eth0: DC21143 at 0x2000 (PCI bus 0, device 14), h/w address
00:c0:f6:10:0a:b1,
and requires IRQ9 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
tulip.c:v0.93 11/7/2001 Written by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/tulip.html
eth1: Digital DS21143-xD Tulip rev 65 at 0xc8850000, 00:C0:F6:10:0A:B1,
IRQ 9.
eth1: EEPROM default media type Autosense.
eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2)
block.
eth1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY
(2) block.
eth1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4)
block.
eth1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY
(4) block.
eth1: Restarting internal NWay autonegotiation, 0003ffff.
eth1: tulip_open() irq 9.
eth1: Restarting internal NWay autonegotiation, 0003ffff.
eth1: Done tulip_open(), CSR0 f8a08000, CSR5 f0520000 CSR6 b2422202.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: N-Way autonegotiation status 000020c6, 10baseT.
eth1: 21143 negotiation failed, status 000020c6.
eth1: Testing new 21143 media 100baseTx.
eth1: interrupt csr5=0xf0678006 new csr5=0xf0678006.
eth1: The transmitter stopped. CSR5 is f0678006, CSR6 b3862002, new CSR6
83860000.
eth1: exiting interrupt, csr5=0xf0670004.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf8668000 new csr5=0xf8668000.
eth1: 21143 link status interrupt 000000c5, CSR5 f8668000, fffbff7f.
eth1: 21143 100baseTx link beat good.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: N-Way autonegotiation status 000000c5, 100baseTx.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth0: Setup frame timed out, status f0660000
eth1: interrupt csr5=0xf0008102 new csr5=0xf0008102.
eth1: The transmitter stopped. CSR5 is f0008102, CSR6 b3860000, new CSR6
83860000.
In tulip_rx(), entry 0 80000000.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0008102 new csr5=0xf0008102.
eth1: The transmitter stopped. CSR5 is f0008102, CSR6 b38e0000, new CSR6
83860000.
In tulip_rx(), entry 0 80000000.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.
eth1: exiting interrupt, csr5=0xf0660000.
eth0: media is unconnected, link down or incompatible connection.
eth1: N-Way autonegotiation status 000000c6, 100baseTx.
eth1: No 21143 100baseTx link beat, 000000c6, trying NWay.
eth1: Restarting internal NWay autonegotiation, 0003ffff.
eth1: N-Way autonegotiation status 000020c7, 10baseT.
eth1: 21143 negotiation failed, status 000020c7.
eth1: Testing new 21143 media 100baseTx.
eth0: media is 100Mb/s.
eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.
eth1: exiting interrupt, csr5=0xf0660000.
eth1: N-Way autonegotiation status 000000c5, 100baseTx.
in this case, /etc/modules.conf has eth0 - eth3 aliased to tulip
2] the tulip card i'm using was purchased from BlackBox which is a
large-volume
computer peripheral retailer here in Belgium, and the card carries their
brand
(ie., it's a no-name brand). However, i have written down all the
information i could
find on the chips that are on the card:
they are:
ALTIMA
0136TN
AC101-QF
CF292602B7
ALTIMA
0144TT
AC104-QF
CF446101B4
ADMtek OLIVE
LES105
0053AAABR26753.1
i21143PD
L203LE78
INTEL (M) (C) 1997
MoSys
SGRAM
MG802C
256Q-8
D2024900AAE
9906
LB 40ST1041E
0146S
If anybody can provide some help on this matter, it would be much
appreciated.
all the best,
Vafa.
______________________________________________
Vafa Izadinia
Lanier Europe B.V.
Tel: +32 02/658.2430
Fax: +32 02/672.7728
______________________________________________
--=_alternative 0027A1DCC1256BCD_=
Content-Type: text/html; charset="us-ascii"
<br><font size=2 face="sans-serif">Hi, thanks for the responses (and apologies for the delay, i was out of the country)</font>
<br>
<br><font size=2 face="sans-serif">In response to the 2 questions/suggestions: </font>
<br>
<br><font size=2 face="sans-serif">1] i have tried using de4x5 (the one included with the 2.4.14 kernel, as the netdrivers </font>
<br><font size=2 face="sans-serif">i downloaded from scyld.com didn't have a de4x5 module)</font>
<br>
<br><font size=2 face="sans-serif">The story is as follows: If i insmod -either- de4x5.o or tulip.o then i only get 1 interface</font>
<br><font size=2 face="sans-serif">(out of the 4), ie., only eth0; -however- if i insmod -both- de4x5.o and tulip.o, then i get eth0 and eth1.</font>
<br>
<br><font size=2 face="sans-serif">in fact, my dmesg reads as follows:</font>
<br>
<br><font size=2 face="Courier New">eth0: DC21143 at 0x2000 (PCI bus 0, device 14), h/w address 00:c0:f6:10:0a:b1,</font>
<br><font size=2 face="Courier New"> and requires IRQ9 (provided by PCI BIOS).</font>
<br><font size=2 face="Courier New">de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com</font>
<br><font size=2 face="Courier New">tulip.c:v0.93 11/7/2001 Written by Donald Becker <becker@scyld.com></font>
<br><font size=2 face="Courier New"> http://www.scyld.com/network/tulip.html</font>
<br><font size=2 face="Courier New">eth1: Digital DS21143-xD Tulip rev 65 at 0xc8850000, 00:C0:F6:10:0A:B1, IRQ 9.</font>
<br><font size=2 face="Courier New">eth1: EEPROM default media type Autosense.</font>
<br><font size=2 face="Courier New">eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.</font>
<br><font size=2 face="Courier New">eth1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.</font>
<br><font size=2 face="Courier New">eth1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.</font>
<br><font size=2 face="Courier New">eth1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.</font>
<br><font size=2 face="Courier New">eth1: Restarting internal NWay autonegotiation, 0003ffff.</font>
<br><font size=2 face="Courier New">eth1: tulip_open() irq 9.</font>
<br><font size=2 face="Courier New">eth1: Restarting internal NWay autonegotiation, 0003ffff.</font>
<br><font size=2 face="Courier New">eth1: Done tulip_open(), CSR0 f8a08000, CSR5 f0520000 CSR6 b2422202.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: N-Way autonegotiation status 000020c6, 10baseT.</font>
<br><font size=2 face="Courier New">eth1: 21143 negotiation failed, status 000020c6.</font>
<br><font size=2 face="Courier New">eth1: Testing new 21143 media 100baseTx.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0678006 new csr5=0xf0678006.</font>
<br><font size=2 face="Courier New">eth1: The transmitter stopped. CSR5 is f0678006, CSR6 b3862002, new CSR6 83860000.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf8668000 new csr5=0xf8668000.</font>
<br><font size=2 face="Courier New">eth1: 21143 link status interrupt 000000c5, CSR5 f8668000, fffbff7f.</font>
<br><font size=2 face="Courier New">eth1: 21143 100baseTx link beat good.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: N-Way autonegotiation status 000000c5, 100baseTx.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth0: Setup frame timed out, status f0660000</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0008102 new csr5=0xf0008102.</font>
<br><font size=2 face="Courier New">eth1: The transmitter stopped. CSR5 is f0008102, CSR6 b3860000, new CSR6 83860000.</font>
<br><font size=2 face="Courier New"> In tulip_rx(), entry 0 80000000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0008102 new csr5=0xf0008102.</font>
<br><font size=2 face="Courier New">eth1: The transmitter stopped. CSR5 is f0008102, CSR6 b38e0000, new CSR6 83860000.</font>
<br><font size=2 face="Courier New"> In tulip_rx(), entry 0 80000000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670005 new csr5=0xf0670005.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth0: media is unconnected, link down or incompatible connection.</font>
<br><font size=2 face="Courier New">eth1: N-Way autonegotiation status 000000c6, 100baseTx.</font>
<br><font size=2 face="Courier New">eth1: No 21143 100baseTx link beat, 000000c6, trying NWay.</font>
<br><font size=2 face="Courier New">eth1: Restarting internal NWay autonegotiation, 0003ffff.</font>
<br><font size=2 face="Courier New">eth1: N-Way autonegotiation status 000020c7, 10baseT.</font>
<br><font size=2 face="Courier New">eth1: 21143 negotiation failed, status 000020c7.</font>
<br><font size=2 face="Courier New">eth1: Testing new 21143 media 100baseTx.</font>
<br><font size=2 face="Courier New">eth0: media is 100Mb/s.</font>
<br><font size=2 face="Courier New">eth1: interrupt csr5=0xf0670004 new csr5=0xf0670004.</font>
<br><font size=2 face="Courier New">eth1: exiting interrupt, csr5=0xf0660000.</font>
<br><font size=2 face="Courier New">eth1: N-Way autonegotiation status 000000c5, 100baseTx.</font>
<br>
<br><font size=2 face="sans-serif">in this case, /etc/modules.conf has eth0 - eth3 aliased to tulip</font>
<br>
<br><font size=2 face="sans-serif">2] the tulip card i'm using was purchased from BlackBox which is a large-volume </font>
<br><font size=2 face="sans-serif">computer peripheral retailer here in Belgium, and the card carries their brand</font>
<br><font size=2 face="sans-serif">(ie., it's a no-name brand). However, i have written down all the information i could</font>
<br><font size=2 face="sans-serif">find on the chips that are on the card:</font>
<br>
<br><font size=2 face="sans-serif">they are:</font>
<br>
<br><font size=2 face="sans-serif">ALTIMA</font>
<br><font size=2 face="sans-serif">0136TN</font>
<br><font size=2 face="sans-serif">AC101-QF</font>
<br><font size=2 face="sans-serif">CF292602B7</font>
<br>
<br><font size=2 face="sans-serif">ALTIMA</font>
<br><font size=2 face="sans-serif">0144TT</font>
<br><font size=2 face="sans-serif">AC104-QF</font>
<br><font size=2 face="sans-serif">CF446101B4</font>
<br>
<br><font size=2 face="sans-serif">ADMtek OLIVE</font>
<br><font size=2 face="sans-serif">LES105</font>
<br><font size=2 face="sans-serif">0053AAABR26753.1</font>
<br>
<br><font size=2 face="sans-serif">i21143PD</font>
<br><font size=2 face="sans-serif">L203LE78</font>
<br><font size=2 face="sans-serif">INTEL (M) (C) 1997</font>
<br>
<br><font size=2 face="sans-serif">MoSys</font>
<br><font size=2 face="sans-serif">SGRAM </font>
<br><font size=2 face="sans-serif">MG802C</font>
<br><font size=2 face="sans-serif">256Q-8</font>
<br><font size=2 face="sans-serif">D2024900AAE</font>
<br><font size=2 face="sans-serif">9906</font>
<br>
<br><font size=2 face="sans-serif">LB 40ST1041E</font>
<br><font size=2 face="sans-serif">0146S</font>
<br>
<br><font size=2 face="sans-serif">If anybody can provide some help on this matter, it would be much appreciated.</font>
<br>
<br><font size=2 face="sans-serif">all the best,</font>
<br>
<br><font size=2 face="sans-serif">Vafa.</font>
<br><font size=2 face="sans-serif">______________________________________________<br>
<br>
Vafa Izadinia <br>
Lanier Europe B.V. <br>
Tel: +32 02/658.2430 <br>
Fax: +32 02/672.7728<br>
______________________________________________</font>
<br>
--=_alternative 0027A1DCC1256BCD_=--