[tulip] Still in trouble with miniPCI

[Andre Belem]

Hi,

I have a laptop with a miniPCI which I'm trying to setup. The Ethernet 
card is an Accton EN2422 and IRQ is being set to 0 at boot. There is no 
way option to change in the BIOS.
What can I do ??

Below is the results of tulip-diag.

Andre
-------------------
tulip-diag.c:v2.08 5/15/2001 Donald Becker (becker@scyld.com)
  http://www.scyld.com/diag/index.html Index #1: Found a Accton 
EN1217/EN2242 (ADMtek Comet) adapter at 0x1c00.
This chip has not been assigned a valid IRQ, and will not function.
  This must be fixed in the PCI BIOS setup.  The device driver has no way
  of changing the PCI IRQ settings.
  See  http://www.scyld.com/expert/irq-conflict.html for more information.
Accton EN1217/EN2242 (ADMtek Comet) chip registers at 0x1c00:
  0x00: fe590000 ffffffff ffffffff 00000000 00000000 fc00c810 ff970155 
fffe4010
  0x40: fffe0000 fff0dff8 00000000 fffe0000 00000000 00000200 00000000 
c40ffec8
  Extended registers:
  80: 0000c810 03fe4010 a04c0004 0000ff00 00000000 00000000 00000000 
ffe0f000
  a0: f0000000 16969000 ffff707a 00000000 00000000 00000000 00000000 
00000000
  c0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
00000000
  e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
00000027
  Comet duplex is reported in the MII status registers.
  Transmit stopped, Receive stopped, half-duplex.
   The Rx process state is 'Stopped'.
   The Tx process state is 'Stopped'.
   The transmit threshold is 128.
  Interrupt sources are pending!  CSR5 is fc00c810.
    Link passed indication.
    Timer expired indication.
    Early Rx indication.
   Comet MAC address registers 16969000 ffff707a
   Comet multicast filter 0000000000000000.



--------------------