[tulip] SMC8432BT with DEC21041

[Donald Becker]

On Thu, 1 Nov 2001, Chip Cuntz wrote:

> 1. mii-diag output:
> Basic registers of MII PHY #32:  1000 186c 0000 0000 0061 0000 0000 0000.

PHY #32 is driver emulating MII management registers when using the
internal N-Way transceiver.  Physical MII transceivers are numbered 0-31.

> 3. dmesg output (the boot info snips):

> Linux Tulip driver version 0.9.15-pre6 (July 2, 2001)

While this the right list, note that I only support my unmodified drivers.
...
> tulip0: 21041 Media table, default media 0800 (Autosense).
> tulip0: 21041 media #0, 10baseT.
> tulip0: 21041 media #1, 10base2.
> tulip0: 21041 media #15, MII 100baseT4.

Hmmm, this last entry is bogus.  Run 'tulip-diag -ee' to see if the
driver is misinterpreting the table, or if you have a slightly corrupted
EEPROM media table.


Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993