[tulip] tulip 0.92, carrier errors.

Lafond, Kenneth G kenneth.g.lafond@intel.com
Fri, 9 Mar 2001 10:01:39 -0800


I ran into a similar thing.  As far as I could tell, it works OK with Tulip
0.92r.

Ken

-----Original Message-----
From: John Brosnan [mailto:jbrosnan@asitatech.ie]
Sent: Friday, March 09, 2001 9:06 AM
To: Donald Becker
Cc: tulip@scyld.com
Subject: RE: [tulip] tulip 0.92, carrier errors.


Hi,

we're using a 4 port Dlink DFE-570TX, more
information below.

thanks,

John.


# ifconfig eth1
eth1      Link encap:100Mbps full-duplex Ethernet  HWaddr 00:80:C8:CF:BE:D1
          inet addr:172.17.1.1  Bcast:172.17.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:169497 errors:0 dropped:0 overruns:0 frame:0
          TX packets:81178 errors:5489 dropped:0 overruns:0 carrier:5489
          collisions:0 txqueuelen:100
          Interrupt:11 Base address:0x2c00


Mar  9 15:52:41 : tulip.c:v0.92 4/17/2000  Written by Donald Becker
<becker@scyld.com>
Mar  9 15:52:41 :   http://www.scyld.com/network/tulip.html
Mar  9 15:52:41 : eth1: Digital DS21143 Tulip rev 65 at 0xc8812c00,
00:80:C8:CF:BE:D1, IRQ 11.
Mar  9 15:52:41 : eth1:  EEPROM default media type Autosense.
Mar  9 15:52:41 : eth1:  Index #0 - Media MII (#11) described by a 21142 MII
PHY (3) block.
Mar  9 15:52:41 : eth1:  MII transceiver #1 config 3100 status 7869
advertising 01e1.
Mar  9 15:52:41 : eth2: Digital DS21143 Tulip rev 65 at 0xc8814800,
00:80:C8:CF:BE:D2, IRQ 10.
Mar  9 15:52:41 : eth2:  EEPROM default media type Autosense.
Mar  9 15:52:41 : eth2:  Index #0 - Media MII (#11) described by a 21142 MII
PHY (3) block.
Mar  9 15:52:41 : eth2:  MII transceiver #1 config 3100 status 7869
advertising 01e1.
Mar  9 15:52:41 : eth3: Digital DS21143 Tulip rev 65 at 0xc8816400,
00:80:C8:CF:BE:D3, IRQ 9.
Mar  9 15:52:41 : eth3:  EEPROM default media type Autosense.
Mar  9 15:52:41 : eth3:  Index #0 - Media MII (#11) described by a 21142 MII
PHY (3) block.

Mar  9 15:52:41 : eth3:  MII transceiver #1 config 3100 status 7869
advertising 01e1.
Mar  9 15:52:41 : eth4: Digital DS21143 Tulip rev 65 at 0xc8818000,
00:80:C8:CF:BE:D4, IRQ 12.
Mar  9 15:52:41 : eth4:  EEPROM default media type Autosense.
Mar  9 15:52:41 : eth4:  Index #0 - Media MII (#11) described by a 21142 MII
PHY (3) block.
Mar  9 15:52:41 : eth4:  MII transceiver #1 config 3100 status 7849
advertising 01e1.
Mar  9 15:52:41 : eth1: Setting full-duplex based on MII #1 link partner
capability of 41e1.
Mar  9 15:52:41 : eth2: Setting full-duplex based on MII #1 link partner
capability of 41e1.
Mar  9 15:52:41 : eth3: Setting full-duplex based on MII #1 link partner
capability of 41e1.
Mar  9 15:52:42



_______________________________________________
tulip mailing list
tulip@scyld.com
http://www.scyld.com/mailman/listinfo/tulip