[tulip] tulip 0.92, carrier errors.

[Donald Becker]

On Fri, 9 Mar 2001, John Brosnan wrote:

> we're using a 4 port Dlink DFE-570TX, more
> information below.
> 
> # ifconfig eth1
> eth1      Link encap:100Mbps full-duplex Ethernet  HWaddr 00:80:C8:CF:BE:D1
>           inet addr:172.17.1.1  Bcast:172.17.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:169497 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:81178 errors:5489 dropped:0 overruns:0 carrier:5489
>           collisions:0 txqueuelen:100
>           Interrupt:11 Base address:0x2c00

Hmmm, please try v0.92t in the test director.

> Mar  9 15:52:41 : tulip.c:v0.92 4/17/2000  Written by Donald Becker
> Mar  9 15:52:41 : eth1: Digital DS21143 Tulip rev 65 at 0xc8812c00,
...
> Mar  9 15:52:41 : eth1:  Index #0 - Media MII (#11) described by a 21142 MII
> PHY (3) block.
> Mar  9 15:52:41 : eth1:  MII transceiver #1 config 3100 status 7869
> advertising 01e1.
...
> Mar  9 15:52:41 : eth1: Setting full-duplex based on MII #1 link partner
> capability of 41e1.


Donald Becker				becker@scyld.com
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993